Looking at a new 6.7

jkidd_39

Member
Joined
May 20, 2011
Messages
547
Reaction score
0
Location
NW Arkansas
Mods: Move to the appropriate area if this don't fit..

Well I'm sick and tired of my 6.4's reliability issues.. Found a new 450 today.
62k sticker.. I'm hoping for 35k outta my 08 F-450

Here is some pics

e060295f.jpg

b81fc025.jpg
 

jkidd_39

Member
Joined
May 20, 2011
Messages
547
Reaction score
0
Location
NW Arkansas
That thing wont haul anything like your current 450...you need to jump up to 550 to get back the heavy axles and tow ratings.

why is that? I haul right around 30k gross regularly. I hated everything about my 450.. 19.5 beat you up and the 4.88 gears killed my fuel economy..
 

jkidd_39

Member
Joined
May 20, 2011
Messages
547
Reaction score
0
Location
NW Arkansas
I'm just asking why.. not disputing that the new 450's are built lighter duty.. with a smaller rear axle and 17 inch tires and such..

I will think twice with this truck pulling my 22k material handler around.. but I'm sure I can get it done...
 

Mpoage

New member
Joined
May 18, 2011
Messages
1,017
Reaction score
0
Location
OKC, OK
That thing wont haul anything like your current 450...you need to jump up to 550 to get back the heavy axles and tow ratings.

You don't want to buy a cab and chassis truck. The only problems I have seen with 6.7s were pretty much c&c trucks that dropped valves. Plus there only rated at 300 HP.
 

jkidd_39

Member
Joined
May 20, 2011
Messages
547
Reaction score
0
Location
NW Arkansas
This isn't a c&c truck as far as I know. Someone correct me if I'm wrong.


Sent from my iPhone using Tapatalk while pulling a 36ft gooseneck and not paying attention to the road.
 

Mpoage

New member
Joined
May 18, 2011
Messages
1,017
Reaction score
0
Location
OKC, OK
No its not. C&c trucks have a slightly longer frame and don't come with a bed.
 

jkidd_39

Member
Joined
May 20, 2011
Messages
547
Reaction score
0
Location
NW Arkansas
I expected you to get a 25-27 offer. 16. **** ill give you 20 now

BOOM

Add 13k to it and I'll deliver it!!! I'm hoping for 31-32k trade in. If not I'll keep it and work it.

They got an 08 450 at the dealership with 80k that is listed at 35k and they said it's been sitting for 560 days at the dealership.
 

idkillinit

New member
Joined
May 23, 2011
Messages
663
Reaction score
0
Location
North East, MD
I was gonna trade my 08 lariat ccsb 250 with 51k n that was b4 new body. They offered me 25. I'm saying they won't take it if they can't make 5k proffit. They will sell it for 35 ish but after overhead and any kind of little stuff it needs to be dealer certified I think you'll be lucky to get 28. Id either sell out right or plan on keeping it

BOOM
 

jkidd_39

Member
Joined
May 20, 2011
Messages
547
Reaction score
0
Location
NW Arkansas
Thanks for the opinion. After they showed me the sheet. It would be 62k financed. I might as well buy one outright. The sticker is 62k.

I'm sure I can find a dealership that will do better than 16k. I damn near could part the truck for 16k
 

Latest posts

Members online

Top