7.3 short block, OBS turbos, misc powerstroke parts to sell ASAP!!!

NEED TO SELL!!! Have way too much stuff sitting collecting dust.

3 OBS turbos - Over 250K on each and will likely need rebuilt: $100 OBO Each

2 OBS Pedestals - good condition: $25 each

Complete set of Stock push rods. Great shape and none bent. $50 for set

Complete set of stock valves (intake and exhaust) plus rocker arms. Great shape: $50

Core short block motor:
95 Powerstroke w/ 168K when pulled. Bad compression in the #3 and #5 cylinders I believe. Was using oil. Block with internals and NO heads. No injectors, wiring harness, turbo, fuel bowl, or high pressure oil pump. Pulled from an old pickup of mine and have kept it to rebuild someday. Just need to get rid of it.
$100

Oil Pan: Good shape. Removed from a 95 Powerstroke. $25

Various exhaust up-pipes, collectors for the back of the turbo, manifolds for OBS psd: $$Make offer$$

3 OBS Engine covers: $15 each

OBS Air Filter intake stock: $25

96 set of heads:
approx. 160K miles. They are stripped, ready to be cleaned, ported/polished, and rebuilt. I bought them used and never did anything with them. The block surfaces look fine. $100

00 set of heads:
approx. 175K miles. Complete except for plenums. Great shape. Rebuild if you want to or run them. $150

E99 Intake Spider:
Tapped for boost gauge on hot side. Has all boots etc. Perfect for OBS guy putting an I/C on. $150

6.0 I/C:
End tanks fine as is the cooling area. The top mounting "forks" are broke, but the tank is not cracked or compromised. I was just gonna smooth it out where the tabs are broke and make my own upper mounts to bolt onto it. Would be perfect for an OBS guy that is custom mounting one. $100


It's OBO on everything!!!


Can possibly deliver in Montana, northern Idaho, or eastern Washington.

Wet siders in OR or WA, if you want anything, I could work out some way to get them out there via other members.

PM or call me at 208-316-1828

Pm sent on spider.

very interested in the I/C please send PM so that we can work something out

Spider is sold.

I'll pm you bluedevil.

How many collectors do you have and are they already removed from the up-pipes? Shoot me a PM.

Chit Patrick!!! Still haven't had a chance to dig thru the totes of parts in the storage unit. I hate living out of boxes and storage units!!!

I'll find out how many good ones I have and pm you.

bump on the rest. I just wanna get rid of the crap.

1 Turbo and pedestal SOLD!!

Leaves 2 turbos and 1 pedestal left... Plus all the other stuff from the 1st post.

Update...

1 OBS Pedestal - $25 each

Complete set of Stock push rods. Great shape and none bent. $50 for set

Complete set of stock valves (intake and exhaust) plus rocker arms. Great shape: $50

Core short block motor:
95 Powerstroke w/ 168K when pulled. Bad compression in the #3 and #5 cylinders I believe. Was using oil. Block with internals and NO heads. No injectors, wiring harness, turbo, fuel bowl, or high pressure oil pump. Pulled from an old pickup of mine and have kept it to rebuild someday. Just need to get rid of it.
$100

Oil Pan: Good shape. Removed from a 95 Powerstroke. $25

Various exhaust up-pipes, collectors for the back of the turbo, manifolds for OBS psd: $$Make offer$$

3 OBS Engine covers: $15 each

96 set of heads:
approx. 160K miles. They are stripped, ready to be cleaned, ported/polished, and rebuilt. I bought them used and never did anything with them. The block surfaces look fine. $100

00 set of heads:
approx. 175K miles. Complete except for plenums. Great shape. Rebuild if you want to or run them. $150

6.0 I/C:
End tanks fine as is the cooling area. The top mounting "forks" are broke, but the tank is not cracked or compromised. I was just gonna smooth it out where the tabs are broke and make my own upper mounts to bolt onto it. Would be perfect for an OBS guy that is custom mounting one. $75


It's OBO on everything!!!


Can possibly deliver in Montana, northern Idaho, or eastern Washington.

Wet siders in OR or WA, if you want anything, I could work out some way to get them out there via other members.

PM or call me at 208-316-1828

Do you have an e40d fill tube an obs 7.3l?

BigJDW said:

Do you have an e40d fill tube an obs 7.3l?

Click to expand...

The piece that attaches to the trans? Or just the tube to fill from above?

I have the tube and dipstick. Let me know.

UPDATED LIST - want to sell everything!!

1 OBS Pedestal - $25 each

3 sets Stock push rods. Great shape and none bent. $30 each

2 complete sets of rocker arms and bolts: $30 each

2 complete sets for injectors hold down bolts: $15 each

3 OBS Engine covers: $15 each

6.0 I/C:
End tanks fine as is the cooling area. The top mounting "forks" are broke, but the tank is not cracked or compromised. I was just gonna smooth it out where the tabs are broke and make my own upper mounts to bolt onto it. Would be perfect for an OBS guy that is custom mounting one. $75

1 OBS 100V IDM: $100

1 OBS alternator - reman near brand new. Was still charging good when pulled: $50

SD psd Fan clutch - was working great when the truck was parted out: $85

SD psd Motor mounts - great shape: $50

1 OBS 1.15 A/R stock exhaust housing: $50

2 OBS Turbo Exhaust Back pressure valves - still have butterfly in them: 25 Each

It's OBO on everything!!!


Can possibly deliver in Montana, northern Idaho, or eastern Washington.

Wet siders in OR or WA, if you want anything, I could work out some way to get them out there via other members.

PM or call me at 208-316-1828

UPDATE

1 OBS Pedestal - $25 each
3 sets Stock push rods. Great shape and none bent. $30 each 1 sold - 2 left
2 complete sets of rocker arms and bolts: $30 each 1 sold, still have 1 set
2 complete sets for injectors hold down bolts: $15 each 1 sold, 1 set left
3 OBS Engine covers: $15 each MAKE OFFER
6.0 I/C:SOLD
1 OBS 100V IDM: $100
1 OBS alternator - reman near brand new. Was still charging good when pulled: $50
SD psd Fan clutch - SOLD
SD psd Motor mounts - great shape: $50
1 OBS 1.15 A/R stock exhaust housing: $50
2 OBS Turbo Exhaust Back pressure valves - still have butterfly in them: $25 Each

It's OBO on everything!!!


Can possibly deliver in Montana, northern Idaho, or eastern Washington.

Wet siders in OR or WA, if you want anything, I could work out some way to get them out there via other members.

PM or call me at 208-316-1828

Do you have pics of the exhaust housing?

No I don't but I could get one. It is a stock OBS exhaust housing.

looks like the turbos are gone, just wanted to check and see

Sorry no turbos. Bumpity to the rest.

Strokersace said:

1 OBS Pedestal - $25 each
3 sets Stock push rods. Great shape and none bent. $30 each 1 sold - 2 left
2 complete sets of rocker arms and bolts: $30 each 1 sold, still have 1 set
2 complete sets for injectors hold down bolts: $15 each 1 sold, 1 set left
3 OBS Engine covers: $15 each MAKE OFFER
6.0 I/C:SOLD
1 OBS 100V IDM: SOLD
1 OBS alternator - reman near brand new. Was still charging good when pulled: $50
SD psd Fan clutch - SOLD
SD psd Motor mounts - great shape: $50
1 OBS 1.15 A/R stock exhaust housing: $50
2 OBS Turbo Exhaust Back pressure valves - still have butterfly in them: $25 Each

It's OBO on everything!!!


Can possibly deliver in Montana, northern Idaho, or eastern Washington.

Wet siders in OR or WA, if you want anything, I could work out some way to get them out there via other members.

PM or call me at 208-316-1828

Click to expand...

Bump.

Still have misc for sale. Want to get rid of.