PDA

View Full Version : International IDM bottom kit/ ficm half shell


mooring product
05-03-2012, 12:56 PM
Called international about the IDM bottom kit for the FICM. (Part # 5010598R92)

The parts guy said I could get the part but was unable to get a picture of one.

I can get the part from Ford (4C3Z12B599BARM) but the price is half at International.

Anyone have any info about this? Has anyone ordered one?

I have requested a picture from International, I should get it tomorrow or Monday.

Worstenemy453
05-03-2012, 03:25 PM
Weve used the Ford piece quite a few times here in the shop. What is the price on it from Ford that you are getting ?

mooring product
05-03-2012, 04:41 PM
$369.00 from Ford.

wetnsloppy4x
05-03-2012, 08:22 PM
Question. Does the reapir half have the circuit board and the half of the FICM cover it attaches to and you just bolt the other half of your case to it or ???. I'm trying to understand why these are so much less $$$ than the whole FICM. Pardon my ignorance, I've never had one apart.

Gary
05-03-2012, 09:51 PM
How much is it at International? Do you have the part number?

mooring product
05-04-2012, 07:13 AM
Part number is in my first post.

$135.78 Takes 7-10 days or pay extra $40 for overnight shipping.

$200 savings is nice but is it the same internals?

Im surprised Im the only one looking into this.

fordfreak4life
05-04-2012, 09:32 AM
Order me one pete

Sent from my Milestone X2 using Tapatalk 2

mooring product
05-04-2012, 10:05 AM
Whats your CC number?

fordfreak4life
05-04-2012, 11:24 AM
Whats your CC number?

Are they 4 pin or 7 pin?

Sent from my Milestone X2 using Tapatalk 2

mooring product
05-04-2012, 02:04 PM
7 pin can't do the half shell swap.

Oddly my original 7 pin lasted 8 years with no issues. The 58volt lasted 300miles then fried. The next reman from Ford lasted almost 2 years. The reman by me lasted 3 months.

I can swap a FICM in less the 10 minutes at a truck stop with a pair of vise grips.

fordfreak4life
05-04-2012, 02:28 PM
I here u there

Sent from my Milestone X2 using Tapatalk 2

mooring product
05-04-2012, 03:55 PM
http://www.ebay.com/itm/Ford-Powerstroke-Diesel-6-0l-FICM-Repair-Kit-Board-Fix-it-Yourself-/280874965514?pt=Motors_Car_Truck_Parts_Accessories&hash=item416573da0a&vxp=mtr

look at this...

Dzlnut
05-05-2012, 06:49 AM
Sounds like you have had your share of crappy luck.

mooring product
05-06-2012, 03:52 PM
Called international about the IDM bottom kit for the FICM. (Part # 5010598R92)

The parts guy said I could get the part but was unable to get a picture of one.

I can get the part from Ford (4C3Z12B599BARM) but the price is half at International.

Anyone have any info about this? Has anyone ordered one?

I have requested a picture from International, I should get it tomorrow or Monday.

This International IDM bottom is the same Ford half shell FICM.

$135.78 instead of $369-$400 from Ford.

I ordered mine yesterday and should have it Wednesday. Ill report back...

Most International dealers won't carry it in stock and it takes 7-10 days to get one. I payed $40 extra for 2-3 day shipping.

Stumblefoot
05-06-2012, 08:32 PM
keep us posted, have been reading alot about FICM issues lately mine works so wouldnt need the fast shipping but liking the cost

mooring product
05-09-2012, 02:23 PM
It runs again! This is the correct part.

Side not: You will need to keep the rubber gasket for the new half shell. It does come with new bolts to remount the shell.

Someone should make this a sticky!

wetnsloppy4x
05-09-2012, 03:09 PM
That is great to know. I'll be heading to the International dealer soon. The FICM on my 06' is on it's way out.

anthropisces
05-09-2012, 03:50 PM
I'm picking mine up tomorrow at noon at the Rechtien-International dealer just off of Blue Heron Blvd. along I-95 in Riviera Beach. My total for the part was $110 (the guy told me he was giving me some special sale pricing).

mooring product
05-10-2012, 10:06 AM
I'm picking mine up tomorrow at noon at the Rechtien-International dealer just off of Blue Heron Blvd. along I-95 in Riviera Beach. My total for the part was $110 (the guy told me he was giving me some special sale pricing).

Thats great! Don't forget you will need to give them the old core.

6leakertweeker
05-10-2012, 10:25 AM
Just ordered mine. $148.97 out of Cincinnati. $238 core. Ill have it in 8 hours. : ) thanks for the help guys!

Dave
05-10-2012, 10:32 AM
Part number is in my first post.

$135.78 Takes 7-10 days or pay extra $40 for overnight shipping.

$200 savings is nice but is it the same internals?

Im surprised Im the only one looking into this.

Im sure it was addressed already but its the same exact piece.

6leakertweeker
05-10-2012, 01:41 PM
:frustrated: crap I ordered a 4 pin shell. Who needs it? Its getting shipped to Indy. To mate to cancel the order. If anybody wants it you can pay shipping from Indy plus what I paid for it.

I'm ordering a 7pin now. Ill post up that p/n + price as soon as I find it.

Mdub707
05-10-2012, 02:50 PM
I thought they only did 4 pin half shells bud?

mooring product
05-10-2012, 03:26 PM
I thought they only did 4 pin half shells bud?

This is correct. You will need to order a new complete FICM also available through International but they are blanks and will need to be programed.

I would send it out and have it fixed.

Or find a bad 05+ FICM cheap and buy the half shell.

6leakertweeker
05-10-2012, 03:38 PM
Unfortunately I think you guys are right. The nice people at Miami Valley International searched through every one they had in stock and couldn't find a 7 pin. I do know however that Ford sells the half but its in the neighborhood of $550.00. I guess Ford gets my money once again. : ).

fordfreak4life
05-10-2012, 07:11 PM
Unfortunately I think you guys are right. The nice people at Miami Valley International searched through every one they had in stock and couldn't find a 7 pin. I do know however that Ford sells the half but its in the neighborhood of $550.00. I guess Ford gets my money once again. : ).

Ford doesnt do 7 pin half shells either

Sent from my Milestone X2 using Tapatalk 2

6leakertweeker
05-10-2012, 09:25 PM
Ford doesnt do 7 pin half shells either

Sent from my Milestone X2 using Tapatalk 2

Hmm, that's weird. I had them pull one the other day at my local ford. Maybe its just a local thing. Iirc it was $538.??.

mooring product
05-11-2012, 09:00 AM
Hmm, that's weird. I had them pull one the other day at my local ford. Maybe its just a local thing. Iirc it was $538.??.

Send it out and get it fixed.

Mdub707
05-11-2012, 09:36 AM
I'll buy it from ya...