Excursion Shackle Lift

caladash

New member
Joined
May 22, 2011
Messages
792
Reaction score
0
Location
In A House
Could I please get a quote for some 2 inch Excursion lift shackles for the front please? Excursion is a 2000 four wheel drive. Thank you!
 

OBSWIZ

Member
Joined
May 22, 2011
Messages
846
Reaction score
0
Location
Wellington NV
I wouldn't use 2" hangers with the stock springs..just swap V codes that can carry the weight of the diesel unlike the underrated Excursion springs..you will get 2" lift. Plan on shocks..
 

caladash

New member
Joined
May 22, 2011
Messages
792
Reaction score
0
Location
In A House
I do have the V coded springs! So I will get the 2 inches of lift with the V coded springs? How do I set the back up to match?
 

OBSWIZ

Member
Joined
May 22, 2011
Messages
846
Reaction score
0
Location
Wellington NV
If you add the 2" hangers then you will need a adj track bar, Modded B codes in the rear...plus I'd get the correct shocks and a 30mm rear sway bar..same components I have been selling for 8 years for Excursions..
 

caladash

New member
Joined
May 22, 2011
Messages
792
Reaction score
0
Location
In A House
So will the V coded springs up front give me 2 inches over stock? If it does how do I address the rear? I know about the B codes, which blocks under them?
 

OBSWIZ

Member
Joined
May 22, 2011
Messages
846
Reaction score
0
Location
Wellington NV
V raise 2".., Modded B codes 2"..stock blocks or no blocks if you don't want level or don't want the 2" hangers etc..but will bottom out once in awhile.
 

Latest posts

Members online

No members online now.
Top