t4 flange turbo options

Check my sig for mods. I'm looking at doing the t4 setup from irate I need some options for a turbo any ideas? Thanks

With the small stage 2's I would look at something around an S366 or something similar with a 66 inducer with a 1.05 or so exhaust.

S366 or a modded H2e would be a good choice.
BTW, do you have a larger version of your avatar photo?

S465 with a T4 .9 turbine housing will run cool and spool nicely, I ran one at one point with stock injectors and another guy ran it with stage II's and it ran great for him too. Inexpensive as well.

Mine was a 65/73/.90

Dave

superduty4x4 said:

S366 or a modded H2e would be a good choice.
BTW, do you have a larger version of your avatar photo?

Click to expand...

If you have a facebook you can find that pic and more here. http://www.facebook.com/fordtruckgirls
If you don't I can get the bigger pic for you.

redneckabbott said:

If you have a facebook you can find that pic and more here. http://www.facebook.com/fordtruckgirls
If you don't I can get the bigger pic for you.

Click to expand...

Thanks for the tip

Something around 66/71 would work pretty good with the amount of fuel you have as they are very crisp w/ our 175/30%, but still allow you some room when you are ready to jump up later to small hybrids and larger nozzles. Plus, as stated above there are a multitude of options with that frame charger that will allow growth without a large cost.

okay I'm set on the t4 setup from irate diesel.... what I need to know is what's the main difference between an s366... and tthe s465... I want quick spoool and good air to clean up my smoke

Main difference is the shaft size. That S465 setup with extended tip would be a great all around turbo.

Okay I'm new to these turbos compared to the others so I will talk to jake and see what he thinks is best