5600 lb springs off a 2012

like the title says i have a set of 5600 lb springs off my 2012 only have 9000 miles on them, nothing wrong i just went to a 5200 lb spring with my leveling kit so it wasnt so squated with my trailer on.

150 bucks shipped to your door

pics to follow

Here is a pic

Little bump for someone needing springs

make an offer

What is difference between my 4800 lbs and yours? Inches wise. I have a tei spacer installed and it still sags in front i hate it...are the ranch shocks the same too and would it be an easy swap?

From what I understand about 1.5 inches

I went from 5600 to 5200 and it dropped right under an inch

Man i might be interested. If its a direct swap and nothing else needs to be done or different ranchos, maybe alignment, i might shoot u an offer...wanna wait on my big lift till these 33s are done and they got a LONG way to go

as far as the shocks im not sure, you might have to take one loose and measure the full extended lenght, most leveling kits are designed around this spring for 6.4-6.7s

what size rear block do you have?

The swap is pretty easy i had to remove the front sway bar mounts and the track bar to get the spring out on mine but that stuff isnt bad to remove

Hmm ill try and get one off tommorow. Surely these shocks would have 3 or so inches of play in them. Cause after i added the tei spacer i had NO difference in ride quality. Id probably do it myself if just as long as no wheel alignment is needed. Ill do some research on the shocks too to make sure. Im def interested though. My 6.7 just looks wierd still not leveled. Oh i think my rear block is a 3.5"? Its a 250 long bed reg cab w/out overload springs. I would go measure but im away from it at moment

If its a 250 its probably only a 2.5 rear block

This spring might be what you need without a spacer

I dont mind a little cali lean lol. The weight of the grill guard pushes it down a hair too

it depends on your spacer thickness too

If its 1.5 its probably going to sit right at level

if its 2.5 its probably going to be a hair nose high

Yeah it's a tei 1"...under 4800 coils. I had no idea the f250s came with 3 diff coil options until I read up on em lol

Still have yet to pull my shocks off...anyone know if the fx4 rancho shocks are the same for all coil configurations?

I'm pretty sure all the shocks are the same length except for when you level them then you need longer

Someone make an offer need them out of my garage

Bump

Ill check when I get home to see if mine are 5200lb or lower.


Sent while dismantling your neighbors meth lab.

Mine are 5310-AEC

so what the hell do I have lol?


Sent while dismantling your neighbors meth lab.

Sent while dismantling your neighbors meth lab.

this is about the only info i could find

PART NUMBER PART NAME
5C3Z-5310-CA Front Spring (ACC)
5C3Z-5310-DA Front Spring (ADC)
5C3Z-5310-EA Front Spring (AEC)
5C3Z-5310-FA Front Spring (AFC)

F-Super Duty Monobeam Coil Spring Rates (F250/350 4x4)
Front GAWR Rating Current Vehicle Spring Coil P/N 5C34-5310- Intall F250/F350 2-UP
4000 AHC AFC
4400 AGC AEC
4800 AFC ADC
5200 AEC ACC
5600 ADC ACC
6000 ACC No Replacement Part Available