paint the frame

I tried using this spray on rubberized stuff and i looks horrible, What is eveyone using to paint there frames.

I used rubberized undercoating in a rattle can looks good till the dirt hits it. When that happens just spray some more on.

ezzyke said:

I used rubberized undercoating in a rattle can looks good till the dirt hits it. When that happens just spray some more on.

Click to expand...

overtop the dirt! LOL

Unbolt everything send frame to powdercoater. In meantime tear motor down, send tranny, out buy better parts where needed...reassemble

I used VHT Epoxy frame and chassis paint. Stays nice and glossy. I did all the unpainted parts the day I brought my truck home, before they had a chance to rust!

I used valspar implement IH red

StrokinNsmokin said:

www.nomorerust.com

Click to expand...

How much of their product and which product did you use?

StrokinNsmokin said:

Click to expand...

You suck. ( I'm so jealous I'm turning green! ) imp:

If mine ever breaks to where I have time to tear it down I'm taking the time to copy you.

How long ago did you do this? Is it holding up well? Do you still drive the truck in the winter?

I am loving what they say on the website but am skeptical if it really works that well.

heres some pics of my frame.

Sent from my EVO using Tapatalk! Snootchie Bootchies

swamp_ratt said:

heres some pics of my frame.

Sent from my EVO using Tapatalk! Snootchie Bootchies

Click to expand...

Ok I take back what i said about being jealous of Strokin.

NOW I'm jealous of you. Man that would look sweet with my toreador red body.

Dammit! The wife's gonna kill me now!

Like i stated earlier its valspar ih red implement paint. Its about 40 bucks a gallon. I used 4 coats (3 plain, final with hardener) and didnt use much more than half a gallon. Has 3 coats of valspar red oxide implement primer on nothing but a steam pressure washed frame. Primer is about 40 a gallon and the hardener was 14 bucks a quart i think

How long ago did you do this? Is it holding up well? Do you still drive the truck in the winter?

I am loving what they say on the website but am skeptical if it really works that well.

Click to expand...

I did this last winter and had held up perfect I ran out for the front so I have to do that this winter but I have had brake fluid sit on it for hours and didnt phase it at all! I would highly reccomend it! I just stumbled across it online too

I talked with Pat and this may be the route I go... Still deciding on which one to use that stuff or fluid film

I sprayed mine with undercoat from rustoleum and then sprayed it with semi gloss black rustoleum paint.

dymn that valspar is sweet, I'm going to go the no more rust route.
My hoa is going to be happy to see my bed on my lawn again LOL

SEM Rust Shield is my product of choice. I used there Rust Mort rust converter first, then top coated with Rust Shield. There are quite a few quality options though.

i had the back half of my frame sprayed with bed liner along with the bottom side of my bed, so far its holding up great, the rest will get done this winter