The Replacement for my POS 2008

Grey_Matter

New member
Joined
Jun 22, 2016
Messages
166
Reaction score
0
Location
SOMD
Traded the nightmare truck in after fighting with all of it's problems. Some of you may have seen the thread
http://powerstrokearmy.com/forums/showthread.php?t=75826

As promised in the thread here is a pic of the new truck
20170502_190404_zpsxnzjeakf.png


I had the dealer install the lift so my warranty isn't effected.

It is a 4" BDS radius arm with fox 2.0
The wheels are M/T 20x12 with Mastercraft 37x13.50R20
 

Grey_Matter

New member
Joined
Jun 22, 2016
Messages
166
Reaction score
0
Location
SOMD
It ride very well, the speedo was calibrated by the dealership when they did the install

Not sure when M/T made them x12, I bought the wheels used and had them powder coated, they used to be polished
 

DEEZUZ

NO PUKESTERS
Joined
Jun 30, 2011
Messages
6,821
Reaction score
179
Location
NWI
Sweet. Now don't pop the hood unless your adding washer fluid. LOL
 

Strokersace

Well-known member
Joined
May 20, 2011
Messages
4,878
Reaction score
36
Location
Towanda, KS
It ride very well, the speedo was calibrated by the dealership when they did the install

Not sure when M/T made them x12, I bought the wheels used and had them powder coated, they used to be polished
Should have left them polished...

If I could find a set, I'd buy them in a heartbeat.

Sent from my SCH-I545 using Tapatalk
 
Last edited:

Grey_Matter

New member
Joined
Jun 22, 2016
Messages
166
Reaction score
0
Location
SOMD
They had alot of salt damage, powdercoating was the only option,
And they are most definitely 10"

I just looked and sure enough they are 20x10
 
Last edited:

03mm

New member
Joined
Aug 12, 2013
Messages
361
Reaction score
0
Location
FL/MD
Looks great man. All these badass looking 17s are starting to make me think about giving up the shorty.
 

Strokersace

Well-known member
Joined
May 20, 2011
Messages
4,878
Reaction score
36
Location
Towanda, KS
They had alot of salt damage, powdercoating was the only option,
And they are most definitely 10"

I just looked and sure enough they are 20x10
If you'd ever want to sell them, even with the powder coat, I'd seriously be interested in them.

I'd strip the coating off, sand them down, and polish them up!

Sent from my SCH-I545 using Tapatalk
 

Grey_Matter

New member
Joined
Jun 22, 2016
Messages
166
Reaction score
0
Location
SOMD
If you'd ever want to sell them, even with the powder coat, I'd seriously be interested in them.

I'd strip the coating off, sand them down, and polish them up!

Sent from my SCH-I545 using Tapatalk

Sanding them down might have been an option, but I was told the pitting could get worse so I decided to powder coated them, I'm glad I did cause I think the turned out awesome.
 

Latest posts

Members online

Top