Need some help with wheel selection.

Durden86

New member
Joined
Jun 12, 2017
Messages
9
Reaction score
0
Location
Savannah Ga
I currently have a 2016 250 with a 4" fabtech running toyo 37/13.50s on the stock chrome 20s. I need some help figuring what aftermarket wheel I can run far as offset and backspacing goes without having to lift the truck anymore than it already is and not having to cut metal. Any help would be greatly appreciated and add some pics for reference if possible. Thanks for all the help!
 

Tom@BigTimeKustomz

Active member
Joined
May 15, 2012
Messages
4,131
Reaction score
6
Location
Bayville, NJ
There are many configurations you can look at when choosing wheels. I don't like a lot of offset, so I have 20x10, -24 which gives it just a little wider than stock look. I'm running Fuel Coupler 1 piece wheels on a 2.5" leveling kit. Let me know if you find some wheels you like and I can get you some excellent pricing!!
 

WHY NOT

New member
Joined
Jun 21, 2011
Messages
3,912
Reaction score
0
Location
Carlyle IL
Can I run a wheel with that much offset with the 37-13.50s with only a 4" lift?

It should work, maybe have to pull back the inner fender and space out the bumper but should work. If you have to trim metal it would be a tiny amount of the pinch weld that you will never see (can be done with a dremmel tool). Not like cutting big parts of the fender or bumper that you would see from the outside. A 20x10 with a -12 offset would look good and give you a little more clearance with the wider 13.50 tire.
 

Durden86

New member
Joined
Jun 12, 2017
Messages
9
Reaction score
0
Location
Savannah Ga
Currently my setup is rubbing my radius arm pretty bad thats the main reason im looking at some different wheels
 

bigrpowr

<How I Fly
Administrator
Joined
May 22, 2011
Messages
15,240
Reaction score
1
Can I run a wheel with that much offset with the 37-13.50s with only a 4" lift?

it will most likely require some trimming. i ran 10.5 wides with -25 and they rubbed with 35's and 4.5" of lift .
 

95cobby

New member
Joined
Jul 29, 2015
Messages
153
Reaction score
0
Location
Houston
I'm running 20x10 -19offset with 35x13.50r20 at stock height with no rubbing.. I did space my front bumper out 1 inch and pulled the fender liners back with zip ties though. I'll be putting a 4.5" lift on soon and will be going to 37s and don't expect to rub. If anything, like already mentioned you may need to trim some off the pinch weld


Sent from my iPhone using Tapatalk
 
Last edited:

Durden86

New member
Joined
Jun 12, 2017
Messages
9
Reaction score
0
Location
Savannah Ga
I'm running 20x10 -19offset with 35x13.50r20 at stock height with no rubbing.. I did space my front bumper out 1 inch and pulled the fender liners back with zip ties tough. I'll be putting a 4.5" lift on soon and will be going to 37s and don't expect to rub. If anything, like already mentioned you may need to trim some off the pinch weld


Sent from my iPhone using Tapatalk
What all did you have to do to space the bumper out?
 

95cobby

New member
Joined
Jul 29, 2015
Messages
153
Reaction score
0
Location
Houston
What all did you have to do to space the bumper out?



You can either buy a spacer kit made for it, such as the one from kdfabworks or use stacks of washers or something similar. Any spacer thicker then 3/4" will likely need longer bolts. Basically take front bumper off, put spacers in, bolt it back on.


Sent from my iPhone using Tapatalk
 

Durden86

New member
Joined
Jun 12, 2017
Messages
9
Reaction score
0
Location
Savannah Ga
You can either buy a spacer kit made for it, such as the one from kdfabworks or use stacks of washers or something similar. Any spacer thicker then 3/4" will likely need longer bolts. Basically take front bumper off, put spacers in, bolt it back on.


Sent from my iPhone using Tapatalk
Oh ok that sounds simple enough
 

C2tuck

Active member
Joined
Nov 30, 2016
Messages
1,042
Reaction score
11
Location
North Texas
I'm running 20x10 -19offset with 35x13.50r20 at stock height with no rubbing.. I did space my front bumper out 1 inch and pulled the fender liners back with zip ties though. I'll be putting a 4.5" lift on soon and will be going to 37s and don't expect to rub. If anything, like already mentioned you may need to trim some off the pinch weld


Sent from my iPhone using Tapatalk

You have any pics of your truck with this set up? From the side and showing how much they stick out? Thanks
 

95cobby

New member
Joined
Jul 29, 2015
Messages
153
Reaction score
0
Location
Houston
You have any pics of your truck with this set up? From the side and showing how much they stick out? Thanks


Sure do

a0d853574a2823fe6f7864882b05638e.jpg

e8e9dd4b585e1ab44701b00941ad6a69.jpg





Sent from my iPhone using Tapatalk
 

C2tuck

Active member
Joined
Nov 30, 2016
Messages
1,042
Reaction score
11
Location
North Texas
Nice. You have one from the side showing the wheels and all? Just curious how they look in the wheel wells too. Also, how do you like those tires so far?

Thanks
 

95cobby

New member
Joined
Jul 29, 2015
Messages
153
Reaction score
0
Location
Houston
Nice. You have one from the side showing the wheels and all? Just curious how they look in the wheel wells too. Also, how do you like those tires so far?

Thanks


Best I have at the moment. Don't miss that chrome at all lol

c3b9521cae4c1ce896a60d4937695fd9.jpg

2554a3a54ab34349023f833a5f1f1828.jpg




Sent from my iPhone using Tapatalk
 

Latest posts

Members online

Top