Go Back   PowerStrokeArmy > Power Strokes > 6.0 Aftermarket

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 02-28-2017, 12:39 PM
weekendwarriorfsw32's Avatar
weekendwarriorfsw32 weekendwarriorfsw32 is offline
Major
Member's Gallery
 
Join Date: May 2011
Location: Central California
Posts: 1,633
Default 6.0 heads Aluminum heads?

So first off let me say yes I know that factory heads are cast steel not aluminum. Now saying that Im rebuilding my 6.0 currents and bought a set of heads from a big name brand already o-ringed and turns out there junk, the valves are reused, the stems were bad, terrible finish, to big of a seat so there is no bottom angle and a huge step that will restrict the flow of exhaust out of the heads. So now I'm back to square 1, I don't really want to play the ford game where it takes 3 sets of heads just to get 1 set that I can machine flat and use. Thinking of going with new castings from over seas and they offer in either cast steel or aluminum. Now I don't know to much about aluminum heads on a cast block other then duramax has been doing it for years an my new 16 6.7 has aluminum but can they take the abuse that the cast heads do? Any one have any experience with this? I think Jegs sell the cast ones http://www.jegs.com/p/ProMaxx-Perfor...07800/10002/-1
__________________
16 F-350 Platinum 4.5 Icon / OUO lift on 35's
08 F-450 KR 6.4 Hallers International coated pistons, John Woods Competition trans, Elite Tow powers (71mm/59mm vgt), Elite Stage 1 cam, Elite Z-max intake, studs, Icon 5.5 on 22.5 AF wheels wrapped in 37's, OUO traction bars, OUO ALA's, No-Limit intake, Alradco
04 X 6.0 Low 12's, OUO traction bars, lots of Riffraff Diesel, BMF Novakane's, wrapped in Nitto 420's, 05 clone, Alradco
01 X 7.3 38R, 238/80's, Riffraff everything

Last edited by weekendwarriorfsw32; 02-28-2017 at 12:41 PM.
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 01:09 PM.

 

Powered by vBulletin®
Copyright ©2000 - 2018, vBulletin Solutions, Inc.

Designed by Military Ltd