Go Back   PowerStrokeArmy > Power Strokes > 6.7 Tech

Reply
 
Thread Tools Display Modes
  #1  
Old 02-18-2020, 01:15 PM
boggerr's Avatar
boggerr boggerr is offline
Sergeant
Member's Gallery
 
Join Date: Jun 2013
Location: Barnegat, N.J.
Posts: 244
Default 2015 injector questions

Have a 15 with 185K on it and just started throwing a P1551 cylinder 1 injector circuit range/ performance code. Did some looking and what I found on it was the injector is probably going out. Iím going to check out the harness this weekend but my luck itís most likely going to be an injector, so Iím going to replace all injectors.
Now!

Remain or new injectors and best place to get them from.... besides Ford

When either installing new or remans do they have to be programmed to the truck?

Is it only IDS that can be used if they have to be programmed or can you do it with forscan or any other device?
  #2  
Old 02-18-2020, 04:52 PM
sootie's Avatar
sootie sootie is offline
General
Member's Gallery
 
Join Date: Oct 2012
Posts: 11,685
Default

Yes, you need to program the injector codes found on the ccv box lid.

Alliant power injectors are good.

IDS is best but Forscan has the capability.
  #3  
Old 02-19-2020, 05:32 AM
HeavyAssault's Avatar
HeavyAssault HeavyAssault is offline
Major
Member's Gallery
 
Join Date: May 2011
Location: Middle, VA
Posts: 1,331
Default

Quote:
Yes, you need to program the injector codes found on the ccv box lid.

Are those the codes for the currently installed injectors?? I was told the new injectors will have their own code that needs to be programmed. Can you give more details??
  #4  
Old 02-19-2020, 11:11 AM
boggerr's Avatar
boggerr boggerr is offline
Sergeant
Member's Gallery
 
Join Date: Jun 2013
Location: Barnegat, N.J.
Posts: 244
Default

Thanks for the info, Sootie

Any recommended PSA vendors?
  #5  
Old 02-19-2020, 11:27 AM
sideactiondiesel's Avatar
sideactiondiesel sideactiondiesel is offline
Lieutenant
Member's Gallery
 
Join Date: Feb 2012
Location: Richmond IL
Posts: 755
Default

We can flow-test balance and rebuild ANY CR injectors here at our facility let me know if or when you get them out and ship them to me and I will get the diagnosed on the bench and go from there. Lmk if we can help
__________________
Brenton Lindenberg
Side Action Diesel Performance
1-815-703-6652
www.sideactiondiesel.com


6.4 FBD blocks

6.4 triple turbo kits

6.4 dual fuel kits

6.7 replacement and upgraded turbo's


Along with Allison,Dodge, Ford Converters and full transmission builds

Quality products
" The bitterness of poor quality remains long after the sweetness of low price is forgotten"
  #6  
Old 02-20-2020, 07:33 AM
boggerr's Avatar
boggerr boggerr is offline
Sergeant
Member's Gallery
 
Join Date: Jun 2013
Location: Barnegat, N.J.
Posts: 244
Default

Quote:
Originally Posted by sideactiondiesel View Post
We can flow-test balance and rebuild ANY CR injectors here at our facility let me know if or when you get them out and ship them to me and I will get the diagnosed on the bench and go from there. Lmk if we can help
Thanks and wish I could do that but unfortunately I canít tie the truck up for that long. If something changes, Iíll be in touch
  #7  
Old 02-20-2020, 07:03 PM
sideactiondiesel's Avatar
sideactiondiesel sideactiondiesel is offline
Lieutenant
Member's Gallery
 
Join Date: Feb 2012
Location: Richmond IL
Posts: 755
Default

Quote:
Thanks and wish I could do that but unfortunately I can’t tie the truck up for that long. If something changes, I’ll be in touch
We can also do new as well. its all up to cost/time LMK
__________________
Brenton Lindenberg
Side Action Diesel Performance
1-815-703-6652
www.sideactiondiesel.com


6.4 FBD blocks

6.4 triple turbo kits

6.4 dual fuel kits

6.7 replacement and upgraded turbo's


Along with Allison,Dodge, Ford Converters and full transmission builds

Quality products
" The bitterness of poor quality remains long after the sweetness of low price is forgotten"
  #8  
Old 02-25-2020, 06:20 PM
BigRed97's Avatar
BigRed97 BigRed97 is offline
Lieutenant
Member's Gallery
 
Join Date: Aug 2011
Location: Saugus MA
Posts: 500
Default

Quote:
Originally Posted by HeavyAssault View Post
Are those the codes for the currently installed injectors?? I was told the new injectors will have their own code that needs to be programmed. Can you give more details??

Yes the codes on the ccv are for the installed injectors. The new ones will have new codes with them. The pcm need the new codes programmed to the corresponding cylinder number
__________________
Truckless for now
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 12:17 AM.

 

Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.

Designed by Military Ltd