Missing and loss of power. 01 f250 automatic

kingbilly68

Member
Joined
Nov 12, 2014
Messages
345
Reaction score
3
Hey guys, Got a new issue. Rough idle. Not romping. Misses on acceleration with a cel. Drive for 30 minutes or so and it clears up usually. Only way I can pull codes is torque app and it shows no codes. No unusual or excessive smoke. Any advice is appreciated. Had it scanned at Oreilly and auto zone and it showed no codes other than air bag indicator and left front speed sensor. No long starts and it does this regardless of temperature. It’s been anywhere from 32-80 degrees here lately.
 

DieselDC

Member
Joined
Jan 10, 2017
Messages
401
Reaction score
0
They can’t scan it correctly. Your scanner is probably for fitting. Find a buddy with ae scanner.

Idm most likely.

Valve cover gaskets

Wiring etc

Injectors themselves.


—————signature—————
~Don’t overthink something simple~
...:uptight people suck:...
 

kingbilly68

Member
Joined
Nov 12, 2014
Messages
345
Reaction score
3
They can’t scan it correctly. Your scanner is probably for fitting. Find a buddy with ae scanner.

Idm most likely.

Valve cover gaskets

Wiring etc

Injectors themselves.


—————signature—————
~Don’t overthink something simple~
...:uptight people suck:...



I’ll see if I can find someone near me with ae. If not, hopefully a local shop has a snap on scanner.
 

kingbilly68

Member
Joined
Nov 12, 2014
Messages
345
Reaction score
3
Got it scanned today. Idm code. Anything I should check before I order one?


Sent from my iPad using Tapatalk
 

DieselDC

Member
Joined
Jan 10, 2017
Messages
401
Reaction score
0
Order that first. Ebay. Cheap. I got two of them.


—————signature—————
~Don’t overthink something simple~
...:uptight people suck:...
 

kingbilly68

Member
Joined
Nov 12, 2014
Messages
345
Reaction score
3
Order that first. Ebay. Cheap. I got two of them. I found refurbished for $129 with lifetime warranty.


—————signature—————
~Don’t overthink something simple~
...:uptight people suck:...



Any reason to go with higher voltage with stock injectors?


Sent from my iPad using Tapatalk
 

DieselDC

Member
Joined
Jan 10, 2017
Messages
401
Reaction score
0
Any reason to go with higher voltage with stock injectors?


Sent from my iPad using Tapatalk



They are all the same whether it be from an obs or Sd. The 120v is more efficient so get that.


—————signature—————
~Don’t overthink something simple~
...:uptight people suck:...
 

kingbilly68

Member
Joined
Nov 12, 2014
Messages
345
Reaction score
3
20b54c24a49a90dc0ba4fac538e536c6.jpg
20b54c24a49a90dc0ba4fac538e536c6.jpg
9bf1755711b5cca94148665c545c6dd1.jpg
5d38f2af2d9eb06d80d6dd623db3a548.jpg


These are after replacing the idm. I buzz tested today and #7 was very weak.
 

kingbilly68

Member
Joined
Nov 12, 2014
Messages
345
Reaction score
3
It was the harness. It was partially unplugged inside the valve cover. 50 cent mod...
 

Latest posts

Members online

No members online now.
Top