My rebuild/build tired of being basic

Hendrys2009 · Oct 13, 2014

Dmstrucks02 said:
You're going to rebuild anyway right?

Eventually, Im going to buy a motor and slowly build it. That way when I put a window in mine I will be ready to go.

Dmstrucks02 · Oct 13, 2014

Hendrys2009 said:
Eventually, Im going to buy a motor and slowly build it. That way when I put a window in mine I will be ready to go.

Will they let you inspect the motor at all?

Dmstrucks02 · Oct 13, 2014

Hendrys2009 said:
Eventually, Im going to buy a motor and slowly build it. That way when I put a window in mine I will be ready to go.

Will they let you inspect the motor at all?

Hendrys2009 · Oct 13, 2014

Dmstrucks02 said:
Will they let you inspect the motor at all?

Im sure they will, but not much to inspect without tearing it apart, And I highly doubt they will let me do that.

Dmstrucks02 · Oct 13, 2014

Pull the pan if they'll you

6.7pstroker · Oct 22, 2014

Truck looks sweet man! Which switchbacks did you get?

Hendrys2009 · Oct 22, 2014

6.7pstroker said:
Truck looks sweet man! Which switchbacks did you get?

Thanks buddy. They are from superbrightleds.com. Currently waiting for my compressor housing for my turbo to make it from mpd. Got everything for my s467.7 kit but that.

Dmstrucks02 · Oct 25, 2014

Hendrys2009 said:
Thanks buddy. They are from superbrightleds.com. Currently waiting for my compressor housing for my turbo to make it from mpd. Got everything for my s467.7 kit but that.

When do we start torqueing
I'd like to come check this out, lend a hand

Hendrys2009 · Oct 25, 2014

Dmstrucks02 said:
When do we start torqueing
I'd like to come check this out, lend a hand

I'm still waiting for the compressor cover then everything has to go to powder, so it could be a while.

nickg3130 · Nov 5, 2014

Hendrys2009 said:
Well I did a small upgrade today. Trying to get rid of all the Amber lights on this thing so I ordered some switchbacks from superbrightleds. I think they turned out pretty sick.

Also bouncing some ideas around for my grille. Not crazy about the "platinum" silver grille. I want to paint the shell and the bars pearl white, then bring some of my blue from my powder to the chrome "C's" and the mesh. What do y'all think?

Sent from my iPhone using Tapatalk

Hey man i remember you posting this a while back and i just have a few questions bc i am looking to do a retrofit myself. Do any bulbs fit inside the projectors or do you need different bulbs? Im just curious if i can use my hids i have on the truck now along with the 3157 switchback as well.

Hendrys2009 · Nov 5, 2014

nickg3130 said:
Hey man i remember you posting this a while back and i just have a few questions bc i am looking to do a retrofit myself. Do any bulbs fit inside the projectors or do you need different bulbs? Im just curious if i can use my hids i have on the truck now along with the 3157 switchback as well.

The top bucket just takes the normal turn signal bulb, or whatever bulb you choose. The projector housing up top is just a dummy for looks. Now the bottom bucket I believe will take the same size as factory, but to be honest im not completely sure. I had mine built

gigabit · Nov 5, 2014

it does not use factory h13 bulbs. its specific to the retrofit housing. usually h1 or d2s

Sent from my iPhone using Tapatalk

Hendrys2009 · Nov 7, 2014

Ok time for a little update. Finally received my MPD kit. Dropped all of the hot parts off at polydyn to get some of their ceramic treatment. All the piping is going to powder and my compressor housing is getting polished. Pretty excited to say the least