Go Back   PowerStrokeArmy > Power Strokes > 6.4 Aftermarket > MCC / DIY Tuning for 6.4

Reply
 
Thread Tools Display Modes
  #1  
Old 07-24-2020, 08:38 PM
slashmaxx slashmaxx is offline
Private
Member's Gallery
 
Join Date: Sep 2019
Posts: 7
Default timing maps

From what I've seen the main timing map should be configuration 0, temp 0.
I've done some logging and mine seams to be in configuration 1 for some reason. single 472sxe, 165 lp pump, fuel bowl/cooler is gone, I've turned the vgt off, and certain dtcs to get the cel to go out,


  #2  
Old 07-24-2020, 10:10 PM
Powerstroke Man 6.4's Avatar
Powerstroke Man 6.4 Powerstroke Man 6.4 is offline
Colonel
Member's Gallery
 
Join Date: Jan 2012
Posts: 4,019
Default

Different modes depends on different IAT and coolant temps.
__________________

No Limit Fabrication
Midwest Diesel & Auto
  #3  
Old 07-26-2020, 08:24 AM
slashmaxx slashmaxx is offline
Private
Member's Gallery
 
Join Date: Sep 2019
Posts: 7
Default

I know about the coolant temp. My fuel press maps work in con. 0, temp 0
My iats were between 70f and 100f when I was making the logs, I did find the map for "iat used in map selection", not sure how the 1-8 correspond to the timing configuration/temps
  #4  
Old 10-15-2020, 08:39 PM
slashmaxx slashmaxx is offline
Private
Member's Gallery
 
Join Date: Sep 2019
Posts: 7
Default

messin wit this again Based of an hd300, It never seems to be in configuration 0, temp 0. Maybe 1,2 or 1,3. I copied my 0,0 map to config 2 and 3 and it went to 4,3 , full derate +10 timing.
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 09:06 AM.

 

Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.

Designed by Military Ltd