Dana 60 front cover

I have the PML cover on the front of mine. I've had it on the truck for 7 or 8 years, but I will have to go back through my receipts and see exactly which one I bought. There has been zero issues with ring gear or steering linkage interference. However the linkage comes very close to making contact when in full turn.

Just to add something different to the thread....this is what I have on the front, its just a cauge that bolts on over the stock cover. Its a purple cranium brand....

I measured this morning and it will hit if running the Dana 60 rear cover on the front. Especially if running the factory stabilizer setup. It's about 3.25" when turned full lock to the right and considerably less to the left due to the stabilizer.

I just dug through my binder, and I have PML #9866. According to the PML site, that is now a discontinued cover.

Great information guys. This is what makes forums so useful.

I'm going to be running a RuffStuff specialties cover on my Dana 60.

http://www.ruffstuffspecialties.com/catalog/D6070COV.html