Go Back   PowerStrokeArmy > Power Strokes > 6.0 Aftermarket

Reply
 
Thread Tools Display Modes
  #1  
Old 02-17-2018, 01:02 PM
6.0 Tech's Avatar
6.0 Tech 6.0 Tech is offline
Colonel
Member's Gallery
 
Join Date: Sep 2015
Location: Mesa, AZ
Posts: 2,773
Default Cts2 not reading ebp

As the title states, my cts 2 is not reading ebp. Reads 0 at all times, thru the dlc. Do not have add on stuff or anything with it. Anybody run into this? Tried 2 different tuners, idp and tsd, tsd i knkw for fact uses ebp in tuning, idp, we figured was running a tune that ignored it. Read 0 on both. Ids reads ebp no issue, and it changes on ids like its supposed to.
__________________
04 cclb IDP and TSD tunes, KC Stage 2 hi pressure, S476 atmosphere, Odawg Stage 2 ported intake, RCD Stage 1 cam, RCD lifters and pushrods, RCD 120# valve springs, ARP 625s, o ringed heads, Warren 7mm 250/100 hybrids, Strictly bowl dereete regulated return, Air Dog 2 4g, Snow stage 2 water/meth
  #2  
Old 02-17-2018, 01:40 PM
CTC DEEZUL's Avatar
CTC DEEZUL CTC DEEZUL is offline
General
Member's Gallery
 
Join Date: Jun 2011
Location: NWI
Posts: 5,423
Default

I don't remember if I have CTS 1 or 2 but ebp is always wrong it 0 as well. 7.3 though
__________________
Teamsters Local 444- Rolling Coal United
  #3  
Old 02-17-2018, 07:35 PM
wedge542 wedge542 is offline
Private
Member's Gallery
 
Join Date: May 2017
Posts: 30
Default

MY cts reads 0 or just a few dots 04,but my forscan reads it no problem,been back and forth with edge no solution yet, it shows up on my 05 no problem.
  #4  
Old 02-17-2018, 08:24 PM
6.0 Tech's Avatar
6.0 Tech 6.0 Tech is offline
Colonel
Member's Gallery
 
Join Date: Sep 2015
Location: Mesa, AZ
Posts: 2,773
Default

Hmmm. Charlie from kc said his 04, which is the same strategy as mine was reading right, maybe it was his livewire then. He said that was something i needdd to keep an eye on with compounds, kinda hard to wihout it reading, and i got too many pillar gauges as it is ...
__________________
04 cclb IDP and TSD tunes, KC Stage 2 hi pressure, S476 atmosphere, Odawg Stage 2 ported intake, RCD Stage 1 cam, RCD lifters and pushrods, RCD 120# valve springs, ARP 625s, o ringed heads, Warren 7mm 250/100 hybrids, Strictly bowl dereete regulated return, Air Dog 2 4g, Snow stage 2 water/meth
  #5  
Old 03-19-2018, 01:38 PM
SICKS LITER SICKS LITER is offline
Sergeant
Member's Gallery
 
Join Date: May 2012
Location: Salem, NH
Posts: 440
Default

Did you try updating it? Id call edge. Ebp reads fine on both my trucks with cts2
__________________
2006 Black XLT Sport F350 SCSB 4x4 - 03 Motor, EGR Gone, ARP Studs, New Ford Heads & Gaskets, Pmax, Xtreme Race, Diesel Site Coolant Filter, PHP 80hp FICM, Flo Pro 4", CTS2 w/Fuel PSI & Pyro, Detroit Truetrac
  #6  
Old 03-19-2018, 02:59 PM
wedge542 wedge542 is offline
Private
Member's Gallery
 
Join Date: May 2017
Posts: 30
Default

They had me download a update,still not work,then i sent it in twice so far,still dont work,works on my 05 but the 04 with the heating strategy will not showup,just some dots in place of a ebp number.
  #7  
Old 03-19-2018, 09:04 PM
6.0 Tech's Avatar
6.0 Tech 6.0 Tech is offline
Colonel
Member's Gallery
 
Join Date: Sep 2015
Location: Mesa, AZ
Posts: 2,773
Default

Quote:
Originally Posted by SICKS LITER View Post
Did you try updating it? Id call edge. Ebp reads fine on both my trucks with cts2
I updated it about 3 months ago to get the fuel mileage deal . I didnt check to see if it was reading before it or not though. When i switched to compounds, i was told to watch that closely. And this is the factory ebp sensor, not an add on, dunno if that is the difference or not.
__________________
04 cclb IDP and TSD tunes, KC Stage 2 hi pressure, S476 atmosphere, Odawg Stage 2 ported intake, RCD Stage 1 cam, RCD lifters and pushrods, RCD 120# valve springs, ARP 625s, o ringed heads, Warren 7mm 250/100 hybrids, Strictly bowl dereete regulated return, Air Dog 2 4g, Snow stage 2 water/meth
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 05:02 AM.

 

Powered by vBulletin®
Copyright ©2000 - 2019, vBulletin Solutions, Inc.

Designed by Military Ltd