6.4 Powerstroke Fuel Pressure issues Help!

sootie

Well-known member
Joined
Oct 3, 2012
Messages
11,854
Reaction score
29
I have had that happen to me twice. No rhyme or reason got in tried starting the truck saw the blinking light got out used the jumper wire and it fired right up. I seemed to only happen when I was running 1 battery. Now that I have two back in the truck it has not happened in over a year.

mine was also caused by a voltage problem now that you mention it...
 

sootie

Well-known member
Joined
Oct 3, 2012
Messages
11,854
Reaction score
29
Where exactly are you jumping from/ to?

on the wire harness that runs from the passenger side battery down to the starter, there is a round bullet connector (close to the battery tray). Separate the connector and touch the side that heads down to the starter, to the positive post on the battery and the truck will crank. If the ignition is in the run position when you do this, with any luck it will fire.
 

300000 and counting

New member
Joined
Apr 14, 2013
Messages
588
Reaction score
0
Location
Ohio
I haven't got my truck back yet but they got the PATS and PCM figured out and they said it took care of the fuel pressure issue!

Thanks for the help.
 

sootie

Well-known member
Joined
Oct 3, 2012
Messages
11,854
Reaction score
29
I haven't got my truck back yet but they got the PATS and PCM figured out and they said it took care of the fuel pressure issue!

Thanks for the help.

Good news!!
 

Latest posts

Members online

Top