• 1) What are you selling?

    2) What is its condition?

    3) Where are you located?

    4) What is your asking price?

    5) Pictures/videos?

    6) At least 3 days between bumping your own ad.

    7) No more than 5 ads per individual at once.

    8) No commercial sales.

    9) You must post when the item sells and state that it is SOLD. Do not report the post or PM moderators to remove your post once it is sold.

    10) No feeler ads.

    11) No firearms or firearm accessories.

7.3 Compound turbo kit- Street/towing/Compt

Derek@Vision Diesel

New member
Joined
May 18, 2011
Messages
5,054
Reaction score
0
Location
Canby, OR
Kit has 0 seconds of run time, brand new!
Keep your AC and factory coolant bottle

All that is required is modification of inner fender on passenger side and battery relocation.

All piping was done by Irate Diesel.

Turbos are spec'd and built by Pius at Bell turbo.
-Atmo: PDSB- 1700cfm- T6 open housing- 80mm compressor
-Primary: ZQ Wheel s300 with 360* thrust- 1150cfm- T4 - 64mm compressor

(2) turbo smart 50mm progates

All oil drain and feed lines.

T4 Irate up-pipes

Comes with down-pipe

Will Fit any 99-03 Superduty or Excursion.

20141013_153806_zpsdavbldra.jpg


20141013_153814_zpssycypahc.jpg


20141013_153833_zpsjyotvycn.jpg


20141013_153837_zpsdlxlpsnc.jpg


20141013_153843_zpsh94uzdfl.jpg


20141013_153848_zpsnneoqihb.jpg


20141013_153859_zpsfphmd1ob.jpg


20141013_153920_zpsvdnjnp0q.jpg


20141013_153925_zpseq7yfsx6.jpg


20141013_153930_zpswelhgw1c.jpg



Ready to bolt up and run. Over 75 hours of labor invest in building this kit to fit perfectly. Built to spool great and make great fuel only numbers. Nothing was spared in the creation of this beautiful kit.

$10,000 OBO
 
Last edited:

sootie

Well-known member
Joined
Oct 3, 2012
Messages
11,854
Reaction score
29
What would be the appropriate oil and injector setup to maximize the performance of this kit?

What do you feel it will support HP wise?

Gorgeous looking...
 

Derek@Vision Diesel

New member
Joined
May 18, 2011
Messages
5,054
Reaction score
0
Location
Canby, OR
What would be the appropriate oil and injector setup to maximize the performance of this kit?

What do you feel it will support HP wise?

Gorgeous looking...

to MAXIMIZE your going to need at least a 200% nozzle, though they were spec'd and built for much more fuel than that. A 400/400 would be awesome with this setup.
No reason why a smaller hybrid wouldn't spool and drive great as well!
 

DocBar

New member
Joined
May 18, 2011
Messages
1,335
Reaction score
0
Location
Akron, Ohio
Damn that's a nice looking set up. If you still have this when I get my bonus check from my last project, I'll buy it. I have the perfect set up for this kit.
 

Action

New member
Joined
Oct 22, 2014
Messages
6
Reaction score
0
Location
Parker, Colorado
compound relation

:ford:Fat looking kit
I'm dying currently waiting for Jake at Irate as he builds me a gtx4088- gtx4788 kit on an Unlimited Diesel long block. Hard block, All studs, Girdle, Port/Polish, beehives, oversized intake valve, Dieselsite lpop and waterpump, ionbond coatings, plus ceramic and vale reliefed pistons, RnR rods, billet flexplate BTS hpop and 4r100, Gearhead stage one cam and tunes, Swamps IDM, Unlimited 400/200s, water inj, prgressive nitrous etc.
I'm dying as I wait! Just joined this forum
have not even finished my prifile but I'll be around
Happy to meet some powerstroke people as i get the White SCLB 350 drw ready to suprise the dogge boys
Look forward to meeting you all!
Dan
 

Derek@Vision Diesel

New member
Joined
May 18, 2011
Messages
5,054
Reaction score
0
Location
Canby, OR
Action you would be ready to hit the roads ASAP if we just had Jake install this kit on your dually.
Saw the dually when we were there about 2 weeks ago, great looking build. Could really use a little bit of Pius's magic in there!
 

Action

New member
Joined
Oct 22, 2014
Messages
6
Reaction score
0
Location
Parker, Colorado
torque is a funny thing
everybody talk hp
but in diesel mid range torque moves weight!
I almost went gtx 35 and 42 at 6000 feet for the ultimate street spool torque monster
 

Action

New member
Joined
Oct 22, 2014
Messages
6
Reaction score
0
Location
Parker, Colorado
I'm a garrett guy. Had I found this 3 months ago I would have prob snagged it and installed myself. Im sure Im in too deep to change now, as all parts are ordered and fab started.
Some lucky guy is going to snag that kit soon!
Looks like a couple of guys are alredy counting cash.
Why are you selling. Was this a build for a customer?
Bell is some good stuff!
Bell , Precision and Garrett. I'm not a BW guy.
Dan
 
Joined
May 18, 2011
Messages
700
Reaction score
0
Location
Austin, Tx
I'm a garrett guy. Had I found this 3 months ago I would have prob snagged it and installed myself. Im sure Im in too deep to change now, as all parts are ordered and fab started.
Some lucky guy is going to snag that kit soon!
Looks like a couple of guys are alredy counting cash.
Why are you selling. Was this a build for a customer?
Bell is some good stuff!
Bell , Precision and Garrett. I'm not a BW guy.
Dan

Hmm... A lot of the Bell turbos I have seen are Borg Warner based chargers. Nothing wrong with BW chargers or Pius wouldn't use them.

Awesome looking compound kit Derek! GLWS.
 

Action

New member
Joined
Oct 22, 2014
Messages
6
Reaction score
0
Location
Parker, Colorado
Nor would Jake at Irate, Nate at Unlimited and MANY other reputable builders.
I've, during my research, seen several BW guys puttting down Garrett when all I could find was killer reviews on The Ball bearing Garretts. This has given my competitive spirit a Garrett desire. Plus I own four Garretts.
Forgive me if I stepped on anybodys toes
Heard good about Bell, never used one or the Borg Warner Version.
Precisions version of Garrett I've good about, but never used one.
But I've abused a couple of my Garretts beyond belief.
 

Latest posts

Members online

No members online now.
Top