Tuning Guide

torque beast

Member
Joined
Dec 22, 2013
Messages
375
Reaction score
1
Here is what I did, one going off stock profile and one raising top to 100%

Stock
73b916c42c228ab64246de76a09b60fb.jpg

fe24af832914267bc71d9e5a90415d00.jpg

334e4eb86defb41e3cb5b8e4a744862b.jpg


Modified
52cb0ed93c79e2fe42856334133b10c5.jpg

6e39545c8ff361adfe95cdda63a5cafc.jpg

e173406bce10b70e24f6417846234852.jpg
 

2012dually

New member
Joined
Sep 28, 2015
Messages
24
Reaction score
0
Location
Canada
If none of the fuel or boost tables torque axis goes above say 1000, why would you have your pedal to torque map at 1200?

Looking at your pedal to torque map you would theoretically be commanding full torque at 52% pedal position and 2000 rpm
 

torque beast

Member
Joined
Dec 22, 2013
Messages
375
Reaction score
1
If none of the fuel or boost tables torque axis goes above say 1000, why would you have your pedal to torque map at 1200?

Looking at your pedal to torque map you would theoretically be commanding full torque at 52% pedal position and 2000 rpm


Ya that is one of the questions I had. Doesn't make sense but the H&S box tune had 1174 in there as well. Not sure if it's right or wrong but I'm like you I don't see a need to go above what's in the axis


Sent from my iPad using Tapatalk
 

torque beast

Member
Joined
Dec 22, 2013
Messages
375
Reaction score
1
Also, my stock table shows a high of 991 but that could be screwed up too as most of my stock tables had issues
 

Latest posts

Members online

No members online now.
Top