OBS picture thread:

KBMKVIII

Well-known member
Joined
Apr 9, 2012
Messages
1,475
Reaction score
26
Location
Texas
e6875877d152f16e86e1381158fa51a0.jpg


c0aafe3ac42114bb86a752a1577b986b.jpg


ceb9eb6998be987d4e20b28b3d2843bf.jpg


05+ swap coming along nicely!
After sitting for three years I decided to give her a quick buff too.
Cleans up nice for original 261k mi paint!
Still and always so much to do before it’s back on the road...
Maybe later this year.
Big thanks to @7.3powerstroke00 for all the work he is doing.
If you’re near Brownwood, TX. Jakes the man to go see at Strokin’ Diesel.
 

KBMKVIII

Well-known member
Joined
Apr 9, 2012
Messages
1,475
Reaction score
26
Location
Texas
Man that’s looking good! I’m a sucker for black, and those are by far my favorite factory wheel.


Thank you!
These wheels were definitely my first pick as well.
Found them on FB marketplace for $200 and had the coating removed and wheels polished for another $100.
I couldn’t pass it up.
 

KBMKVIII

Well-known member
Joined
Apr 9, 2012
Messages
1,475
Reaction score
26
Location
Texas
Well it’s coming together!
Colt stg 2 cam
Block bored 10 over
De-lipped pistons decked 20 thousandths
Carrillo rods
Full rebuild kit
Arp main/head studs
Twin 17* pumps
Precision 76

9612fb78b7b2c6879f488705b4788ead.jpg



6ca06dcf889416160b81b04c338aabf4.jpg



6d1f5fffacc0089ba8c68b3c03719af3.jpg
 

gnxtc2

Active member
Joined
Jun 22, 2011
Messages
2,207
Reaction score
4
Location
Bergen County, NJ USA
No not running one. Still using the stock breather.

I could tell you that I was running a Precision 76 (GT-42) ball bearing, billet wheel turbo on my race car. Went 8.19 @ 165 (1/4 mile) and 5.17 @ 138 (1/8 mile) weighing at 3250 if that means anything to you.

Billy T.
[email protected]
 
Joined
Jan 26, 2014
Messages
953
Reaction score
5
Location
FL
There isn’t one yet.
Trying to find a big enough weld in bung or something of the sort

I saw this on face space. Not sure if it’ll fit with the t4, but it looked interesting.
 

Attachments

  • 71B6B455-9A9E-4D99-A800-A30DA852C42B.jpg
    71B6B455-9A9E-4D99-A800-A30DA852C42B.jpg
    8.8 KB · Views: 150

KBMKVIII

Well-known member
Joined
Apr 9, 2012
Messages
1,475
Reaction score
26
Location
Texas
I saw this on face space. Not sure if it’ll fit with the t4, but it looked interesting.


I wish I had some room, but with the 5” intake coming over the valve cover there is no space on that side.
I just may try the route that gnxtc put up.
 
Joined
Jul 8, 2011
Messages
569
Reaction score
4
Location
Central CA Foothills
I didn’t like the fight between the ccv filter box on top the valve cover and the intake tube, so I put the valve covers on backwards and fabbed an oil filler through the HPOP gear cover like an old 6.9.
Experience tells me not to give up the baffling and oil carryover control built into the stock set up.
 
Last edited:

MeTo

Member
Joined
Nov 14, 2015
Messages
332
Reaction score
3
Well it’s coming together!
Colt stg 2 cam
Block bored 10 over
De-lipped pistons decked 20 thousandths
Carrillo rods
Full rebuild kit
Arp main/head studs
Twin 17* pumps
Precision 76

9612fb78b7b2c6879f488705b4788ead.jpg



6ca06dcf889416160b81b04c338aabf4.jpg



6d1f5fffacc0089ba8c68b3c03719af3.jpg


That is some diesel porn right there!
 

Latest posts

Members online

Top