Need some ideas on truck bed improvement

Dieselcraft

New member
Joined
May 22, 2011
Messages
2,195
Reaction score
0
Location
Moore O.K. Tornado alley
Heres my problem I hauled my quad without a strap and now my bed is all bent in the front.
I wanted to re inforce it when I pulled my cab but I ran out of time so know I need to build a support cuz this looks like crap
1699231c.jpg

a3f16fcf.jpg

Thanks for any ideas
 

Tom S

Moderator
Joined
May 20, 2011
Messages
3,365
Reaction score
1
I think I would see about getting a piece of heavy gauge stainless bent into an angle to put over that top edge of the bed. You can get ones aftermarket but they are more appearance then reinforcement.
 

Big Calo

New member
Joined
May 22, 2011
Messages
473
Reaction score
0
What about making some custom bed caps with a piece of angle running across the front of them, that will bolt to the front of the bed?
 

old96stroker

New member
Joined
May 22, 2011
Messages
700
Reaction score
0
Location
just south of kansas city
Piece of inch and a half angle Iron will fix it perfect, weld a couple eyelets on it in the corner for tiedowns, will fit nice we did it to my dads after a bunch of lick tubs slid forward and did the same thing
 

Latest posts

Members online

Top