330/150's and a S475 Billet wheel plus 360 Thrust 6.0 powerstroke

Debono98 · Feb 2, 2017

slc dzl said:
How much for the sweet space jam blanket? Haha

If those are the sinister made cac tubes check the cold side to intake horn placement. I had a set that were so far off it had to be cut, rotate, couple back together.

Haha I thought so

but they're from a local shop in Indiana so hopefully they're good. They seem to be really good quality. Time will tell once everything gets thrown on.

I also just ordered a no limit intake to replace my airaid intake.

Sent from my iPhone using Tapatalk

Debono98 · Feb 6, 2017

Starting to get everything back from powder coat. Warren didn't have anymore 150% nozzles I guess so they told me my injectors will be shipping out this week sometime.

Sent from my iPhone using Tapatalk

Debono98 · Feb 25, 2017

Well I got my stack back from powder coat today. Threw it on finally. 5" to an 8" diamond cut that's 38" tall.

My injectors are here I am picking them up Monday. Should be running by the weekend!

Sent from my iPhone using Tapatalk

AirFishAutomotive · Feb 27, 2017

Debono98 · Mar 5, 2017

Well yesterday was eventful lol. Could get the s475 to fit. So I put a 369sxe on. After getting everything in and running it was an absolute animal. After about 20 minutes I managed to blow (what we believe) the intermediate shaft apart. Definitely didn't expect it to make this much power that's for sure lol. I gotta get a hold of Dave at RDD and get myself a stage 3 built now hahaha.

Sent from my iPhone using Tapatalk

Extended Power · Mar 5, 2017

Any idea what your drive pressure was?
Running a standard .90 T4 housing?

Debono98 · Mar 11, 2017

Extended Power said:
Any idea what your drive pressure was?
Running a standard .90 T4 housing?

Not really sure. But yeah it's a standard .90 T4 housing. I'm going to be making a pedestal to fit my S475 on and after I get my trans in it I will get a back pressure gauge hooked up.

Sent from my iPhone using Tapatalk