Go Back   PowerStrokeArmy > Non - Specific > Aftermarket Electronics

Reply
 
Thread Tools Display Modes
  #1  
Old 11-18-2020, 02:13 PM
Connor M's Avatar
Connor M Connor M is offline
Lieutenant
Member's Gallery
 
Join Date: Oct 2016
Location: Masshole
Posts: 665
Default 2008 PATS Bypass

I have an 08 lariat, pats has been keeping me from starting it. On another forum I read I could ground out a wire in the drivers kick to disable PATS, and itís what an aftermarket alarm system would do to disable PATS. Anyone know which color wire that is and which bundle itís in?

Itís a rough rough truck, I could have PATS ******d for like 125 bucks but Iíd rather run a jumper for $1.25 so I can run it into the ground and then pull the engine.
__________________
2008 CCSB 6.4 Harley Davidson- PPEI Tuned, EZ Lynk, 4" Jamo Stainless Exhaust, Down But Not Out
2008 CCLB 6.4 Lariat Land Yacht- H&S tuned
2008 EC C&C F450 6.4 Work Truck- Almost there
2003 RCLB 6.0 XLT- 260,000 miles, no name tunes, stock as can be
6.0 Dump Trucks- 350 and 450
VT365 Rollback
  #2  
Old 11-18-2020, 02:49 PM
sootie's Avatar
sootie sootie is offline
General
Member's Gallery
 
Join Date: Oct 2012
Posts: 11,684
Default

just turn the key on and jump the brown bullet connector on the battery cable straight to the positive post. It should fire and reset PATS.
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 05:00 PM.

 

Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.

Designed by Military Ltd