4 Link Front Suspension

bad12jr

New member
Joined
May 25, 2011
Messages
1,244
Reaction score
0
Wow. That is just amazing

Sent from my DROID RAZR HD using Tapatalk 2
 

HOSS-06

New member
Joined
Feb 4, 2013
Messages
50
Reaction score
0
Location
Ontario, Canada
To bring it back to the OP,
I have made a 4 link of my own that I run on my 06 f350 with air bags, similar to the Icon, probably a little heavier though. 2" x 1/4" wall is plenty of tubing for anything that truck will handle. Its a heavier bar then you think.
For the bracket , 1/4" is fine, remember the frame of the truck itself is 1/4" so as long as it is made smart then it is good. I would tie the bracket into the side of the frame and not just bolt to the bottom.
On my kit I used 5/16 plate and have had no issue at all. Very strong, remember only one of the bars is relying on that bracket the other uses the factory bracket!

A couple pics I had not great ones.

311819_10150363067810849_1619740464_n.jpg


383269_10150363068440849_1694224935_n.jpg
 

Latest posts

Members online

Top