Ive got one farm truck that i work on that i cannot scan with my snap on scanner. What is needed to make this truck so that i can scan it? Its got power to the obd port as it powers up my bluetooth scanner, it just wont scan it.
94.5 obd2
- Thread starter Short Bus
- Start date
gnxtc2
Active member
I believe the PCM needs to be flashed by the dealer to be OBD2 compliant.
Billy T.
[email protected]
Billy T.
[email protected]
79jasper
Active member
^ That's best option.
Could be a setting in your snap on for "non-OBD2 compliant."
Sent from my SAMSUNG-SM-G935A using Tapatalk
Could be a setting in your snap on for "non-OBD2 compliant."
Sent from my SAMSUNG-SM-G935A using Tapatalk
Patrick Feeley
Member
Vendors such as DP Tuner can also reflash the PCM (lots of dealers have no clue on doing it). Cheers!
DZL JIM
Member
Can you swap in a later model OBS computer instead of re-flashing?
Or does it have to be the older PCM? Reason I ask is I thought there is different wiring as well from OBDII to the PCM but don't recall for sure. Different wires probably go to different pins in the PCM if that is the case.
Or does it have to be the older PCM? Reason I ask is I thought there is different wiring as well from OBDII to the PCM but don't recall for sure. Different wires probably go to different pins in the PCM if that is the case.
if you have a chip tuned for a later style PCM, you'll be able to connect with the scan tool...or we (or others) can reprogram the PCM.
MLE programs would be what you'd want to run, since they are the most common for 94.5-97 manuals.
MLE programs would be what you'd want to run, since they are the most common for 94.5-97 manuals.
Members online
No members online now.