#1
|
|||
|
|||
![]()
Hows it goin haven't posted here but glad to find some people that could maybe help me out....
I have a 1983 f-250 3/4 ton 2wd , ive looked around the yards around my area and there's a bunch of 3/4 tons around same year but every one I find is different than mine. I thought my Spyder gears had **** out on me but when I cracked the cover oddly enough gears are fine no damage same as ring and pinion but the pin was in pieces don't know how or why everything else is all good but how can I know where or or tell any parts house what part # or which is the correct to order. Since all the gears are good I'd rather not buy the set. I have the tag but dont really know what it means . If anyone out there could help me out I'd appreciate it ![]() ![]() Sent from my XT1254 using Tapatalk |
#2
|
||||
|
||||
![]()
3.07 gears.
I think that's a Dana 60 semi floater. Sent from my SM-G892A using Tapatalk
__________________
2003 F250 KR SCSB FX4 Depleted, studded, airdog (which isn't currently hooked up), fass regulated return, airaide, 4 inch straight pipe with mbrp muffler(so on to go), glowchit pyro, fuel, boost, and trans temp. (Of course don't work lol) Hercules terra track A/T2 315/70/17. 2013 Honda pilot Touring http://badges.fuelly.com/images/sig-us/778639.png http://badges.fuelly.com/images/sig-us/776628.png |
#3
|
|||
|
|||
![]() Quote:
Sent from my XT1254 using Tapatalk |
#4
|
||||
|
||||
![]()
It's a 60. I think some were full, some were semi.
Sent from my SM-G892A using Tapatalk
__________________
2003 F250 KR SCSB FX4 Depleted, studded, airdog (which isn't currently hooked up), fass regulated return, airaide, 4 inch straight pipe with mbrp muffler(so on to go), glowchit pyro, fuel, boost, and trans temp. (Of course don't work lol) Hercules terra track A/T2 315/70/17. 2013 Honda pilot Touring http://badges.fuelly.com/images/sig-us/778639.png http://badges.fuelly.com/images/sig-us/776628.png |
#5
|
|||
|
|||
![]() Quote:
Sent from my XT1254 using Tapatalk |
#6
|
||||
|
||||
![]()
The # 605040-7 is the bill of material number & identifies it. I can't find a part number just for the pinion gears carrier pin but with the attached info if you contact Randy's ring & pinion or any gear shop they should be able to find it. If the pin bore in the carrier case is worn at all, then its junk. & a new pin won't help.
https://www.ringpinion.com/
__________________
2010 F350 KR CCLB, mini max, MCC tuned. Last edited by TD-5; 04-30-2018 at 10:46 AM. |
#7
|
||||
|
||||
![]()
From the Randy's web site; This should be what you need, but better to call & confirm.
__________________
2010 F350 KR CCLB, mini max, MCC tuned. |
![]() |
Thread Tools | |
Display Modes | |
|
|