Go Back   PowerStrokeArmy > Power Strokes > Aftermarket Super Duty 1999 - Current

Reply
 
Thread Tools Display Modes
  #11  
Old 01-12-2018, 04:54 PM
dmd's Avatar
dmd dmd is offline
Lieutenant
Member's Gallery
 
Join Date: Jul 2011
Posts: 552
Default

Single shots will help, not sure the intercooler will too much. With the 7.3 you are pushing
it 100% so it gets to the limits. With 6.7 it has lots more HP and Torque so it will be at
65% and still have plenty to go.

I agree, the extra gears sure would be nice, helps stay in the power band. When ours
shift up we fall right out of the bottom of the peak HP range and most of the time
on big hills there isn't enough left to get it back into the power. Your 410 gears should
help, my 373's don't do me any favors when pulling. I have to drop down early if loosing
speed before it would be too low of RPM even in the next lower gear. Honestly the
38r really drops out below 2000rpm. It was the thing to do at the time, better
options for lower end power now but I don't want to spend the cash when 99.9%
of the time it works just fine.

The HPOP, turbo, and the injectors really help. I don't push it though, I want the
truck to last a few more years.
__________________
2k, F350 SuperCruzer, 7.3L Diesel, Auto trans, 4x4, GH Tunes w/190/30s, S&B cold air intake, 4-inch turbo-back exhaust, Garrett 38r, Adrenaline HPOP, BTS Transmission w/6.0 cooler, Swamps IDM(broke, back to stock), in-tank and pre-pump mod, Heater valve mod, X-car sound panel mod
  #12  
Old 01-12-2018, 06:25 PM
old96stroker's Avatar
old96stroker old96stroker is offline
Lieutenant
Member's Gallery
 
Join Date: May 2011
Location: just south of kansas city
Posts: 688
Default

Pull the 295's off of it when you are towing and run factory size rubber, I bet it would make more than a little difference, I know you probably wouldn't like the looks but it would pull better and handle better also.
  #13  
Old 01-12-2018, 06:59 PM
ithumpwheniwalk ithumpwheniwalk is offline
Sergeant
Member's Gallery
 
Join Date: May 2011
Location: BC Canada
Posts: 366
Default

Quote:
Originally Posted by 565edge View Post
What kind of boost is it making when pulling those grades?

It will make 15 psi on the flats or slight hill. On the larger grades it makes good boost but I cannot remember exactly. I want to say in the 15-20 psi range. It gets hot when I roll my foot into it. It has pedal left in drive but gets hot so I downshift. Once I down shift I get way our of the throttle and hold it it 2,750 RPMS in 2nd gear. usually around 35-38 mph. I need another gear between 2nd and drive.

Totally agree with you DMD! I just want to be able to hold drive even at 45 mph. I might try a Mishimito Innercooler next then stage 1 injectors.
It's already been said, but I'll reiterate. Lose the D66. It is not a good turbo to be towing with.

I'm in your ballpark, my 5th wheel loads out over 14k. There's no way I'd dream of taking the trailer on any sort of trip with my d66. I yanked it off, went back to stock, and it was an improvement.

Not ideal, but like people will tell you, the new turbos like the t4 sxe line are a night and day improvement over the older technology. Just my .02 cents, I'll be upgrading both injectors and turbo for this towing season.
__________________
e99 F350 ccsb 7.3l 6spd, 160cc's from Cass, d66, tunes from BTS, Adrenaline, 6637, and a few other goodies I've forgotten...
  #14  
Old 01-12-2018, 07:02 PM
04cr450's Avatar
04cr450 04cr450 is offline
Major
Member's Gallery
 
Join Date: Aug 2013
Location: harford county, maryland
Posts: 1,779
Default

Agreed^ when i put 35's on the 6.7 i can spike the egt gauge running light on a hot tune... the 6.7s run hot also when towing - im impressed with you're 7.3 lol
__________________
16 250 tri-coat white, 22x12 AF satin black traxx with 325/50 terra g2, no limit goodies, flo pro exhaust, sct x4, recon smoked side and cab lights, retro solution led head and fog lights, icon 2.5" leveling kit with fox 2.0 shocks.
  #15  
Old Yesterday, 08:29 PM
565edge's Avatar
565edge 565edge is offline
Private
Member's Gallery
 
Join Date: Feb 2017
Location: Bakersfield, CA.
Posts: 10
Default

I'm going to look into a different turbo. Being in California I'm stuck with my options. I would love to do a t4 mount set up but I do not know a smog guy. I plan on doing injectors and wait on the kc turbo 38r 366. Some guys really like water injection. Been looking into that as well. I have diesel site intercooler boots and plenum boots, bellowed up pipes and the plenum inserts from riffraf that let you tighten down the clamps more on the heads. Ordered a boost leak detector and will check for leaks this weekend.
__________________
2000 Ford F-350 Dually, 4x4, D-66 Turbo with Billet wheel, .84 Ex housing, DP Tuner F-5, 6637 Intake, riffraff regulated return, terminator t-500, riffraff boost regulator, hutch mod, harpoon mod, 4" exhaust, 295's with 4.10 gears. John woods valve body, billet faced transtar converter and built transmission.
  #16  
Old Today, 11:19 AM
Dan V Dan V is offline
Corporal
Member's Gallery
 
Join Date: Jun 2013
Posts: 56
Default

Putting 1.0ex housing would help the EGT, but it's gonna get laggy.
__________________
'01 F250 4x4 Crew Shorty, PM Rods, PIS new 160/30's, GTP-38 with WW2 and 1.00 ex housing, non-EBPV ped, ITP Regulated fuel return, S&B CAI (dry filter).
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:54 PM.

 

Powered by vBulletin®
Copyright ©2000 - 2018, vBulletin Solutions, Inc.

Designed by Military Ltd