FFR Cobra

Who is looking for a toy?

Full Details coming soon!

Factory FiVe Racing Cobra NOT a donor build All new components used

Roush 427r 536hp dyno sheet is with build documents
TKO 600 5 speed Trans
Mark 3 IRS Rear End 3.55 ratio Detriot Locker? (I need to verify the brand but pretty sure it is a Detriot.)

Paint and Body done by Steve Cook Creations in OKC (www.stevecookcreations.com)

I have all the receipts from the build. It was finished in 2011.

Like I stated earlier, full details coming this weekend.

Looks like a very fun toy. I always wanted one of these. I bought a 2016 GT350 last year and that is an amazing car. Look forward to seeing more info on this.

Nice! I could always use a toy! PM me the price please.

One day I will be at a point where I can build or buy one of these. Definately my favorite ride and I will have one before I'm dead lol. Very nice car and I bet it's a hell of good time behind the wheel glws.

C2tuck said:

Nice! I could always use a toy! PM me the price please.

Click to expand...

PM sent

97f350stroker said:

One day I will be at a point where I can build or buy one of these. Definately my favorite ride and I will have one before I'm dead lol. Very nice car and I bet it's a hell of good time behind the wheel glws.

Click to expand...

Yes it is a blast to drive. Totally manageable on the street and wild when you want it to be. You do have to be on your toes all the time though.

Have over $80 000 in it with the receipts.

Roush 427r-235 stroke 4" bore 4.125"
531.5 hp @ 5800 rpm 524.3 ft/lb torque @ 4400

Tremec TKO600 600Ft/lbs Ratios:
1st 2.92
2nd 1.90
3rd 1.34
4th 1.00
5th .68

McCLeod Bellhousing Blowproof

IRS Rear end 3.55 ratio Tru Trac

15:1 Manual rack steering

Manual brakes with adjustable proportioning valve.

Msd ignition

All updates have been done to engine and Tko 600 that we know about

Tube lower front control arms

Front and Rear coil over shock with 450# springs

Leather roadster interior

Hidden trunk hinges

Interior was lined with lizard skin to help keep some of the header heat out

Ceramic coated headers and heat shields.

Fuel cell. We did end up removing the foam from tank.

I still need to sit down and go through the receipts but these are the highlights. If you have any questions just ask.

This car had one purpose for being built and that was: My father always wanted to build a car that would scare the chit out of him. He got it done. This car is very managable on the street, and wild when you want it to be. It is a pleasure to drive and handles like on rails. You always have to be on your toes when driving it.

Only two people have ever driven this car. That is myself and my father. He has put a majority of the miles on it. He sold it to me because, he felt it was getting to hard for him to handle. He was 71 at the time he sold it to me.

Ummm, I think that mfker would be a handful!
Beautiful car.

It can be, but sure is fun on the way!

And Finally a cleaned up list:

FOR SALE: FFR Mk 3 Complete Kit, all new components, no donor parts
The kit was bought Febuary 2006 and started build in March 2006
Completed in July 2011, registered as a 1965 Make: Factory Five Racing Model: FFR 65 Roadster
Registered in KS in 2016 as a 2011 MFGD kit 65
Current Mileage 2303 Will go up as I drive it. But not driven daily.

Engine:
Roush 427r-235
Stroke 4" bore 4.125"
Compression 10.25
531.5 hp @ 5800 rpm 524.3 ft/lb torque @ 4400

Transmission:
Tremec TKO600 600Ft/lbs
Ratios:
1st 2.92
2nd 1.90
3rd 1.34
4th 1.00
5th .68

Clutch:
McCleod Bellhousing Blowproof
McCleod clutch 10.5” Street/Strip Pressure plate

Rear:
Ford Mrk 3 3.55 ratio Tru Trac Locker
Brakes:
Front - Mustang GT Disc,
Rear - Mustang GT Disc

Wheel and Tires:
15" alloy wheels Halibrand Replica with Knock off spinners
15x8 front 235-60-15 Cooper Cobras
15x10 rear 295-50-15 Cooper Cobras
Interior:
Complete Kit Autometer Vintage gauges
Complete kit low back bucket leather seats, Drivers seat has adjustable track
Dual chrome roll bars
Wind Wings, WS wipers
Under trunk floor battery box (keeps battery out of trunk space).

Bodywork and paint by Paint and Body done by Steve Cook Creations in OKC, OK (www.stevecookcreations.com). Black Cherry color.

Sidepipes:
Complete kit ceramic coated with shields

Front Suspension:
Complete kit Tubular lower control arms, adjustable upper control arms
adjustable damping and adjustable ride height Koni coilovers
15:1 manual rack srteering


Rear Suspension:
Independent Rear Suspension adjustable damping and adjustable ride height Koni coilovers. The car rides awesome and handles like on rails

The car looks and drives great. This last winter I put on a Metco driveshaft hoop and new driveshaft that was balanced and welded by Power Drive in Wichita KS. I upgraded the oil filter adapter for the remote filter and oil cooler. The paint is gorgeous in the sun light and the black cherry pops. In average to poor light the car looks black. There are a couple of flaws in the paint but a buffing would cure them. There is a spider crack at the passenger hood latch. It has not grown since 2012. I do drive it occasionally but not enough. I’m selling for an investment and because I don’t drive it enough to enjoy it due to the fact I have too many other toys.

That's a beautiful car and I'd love to own one...bump for ya!