My Project

bigrpowr

<How I Fly
Administrator
Joined
May 22, 2011
Messages
15,240
Reaction score
1
tweaked the tuning a bit and worked a lot to get the low boost smoke down, basicvally stopped here due to running out of rail pressure with the 15 pump and 10mm Stroker CP3 .not bad for a grocery getter. peak #'s were 1302hp/2287tq

IMG_7380.jpg
 

Six_Sloww

New member
Joined
Dec 5, 2013
Messages
2,574
Reaction score
0
Location
Southeast MI
As long as the H&S kit is in production it's just a matter of calling NL up and ordering all of it. There isn't much to upgrade in the drivetrain besides the trans and maybe some traction bars to reduce the chance of snapping stuff.
That is amazing. Is this recipe reproducible? Roughly what would it cost to get there? and other driveline upgrades needed?

Sent from my SAMSUNG-SM-G935A using Tapatalk
 

bigrpowr

<How I Fly
Administrator
Joined
May 22, 2011
Messages
15,240
Reaction score
1
As long as the H&S kit is in production it's just a matter of calling NL up and ordering all of it. There isn't much to upgrade in the drivetrain besides the trans and maybe some traction bars to reduce the chance of snapping stuff.

Sent from my SAMSUNG-SM-G935A using Tapatalk

what ^^^^ said. trans and traction bars , and a lot of stuff under the hood.
 

jcain

New member
Joined
Jul 14, 2013
Messages
2,017
Reaction score
0
It was a pretty good driving truck. I only drove it on the lowest tune (900+rwhp) to see how it acted. It's Delta+P around 9psi. After that, it's hell on wheels(tires actually). Mike needs to put some lockers in it for sure.
 
Top