SDP 6.7 EGT Sensor Mount Kit

Joined
Feb 21, 2012
Messages
481
Reaction score
0
Location
Cromwell, CT
IMG_5085.jpg


IMG_5087.jpg


IMG_5083.jpg


This kit allows you to mount a 2 type of EGT temp sensor probes into the right side exhaust manifold for pre turbo EGT reading.
-1st side of the plate has a bung that is the proper thread to use a stock EGT sensor out of the DPF and plug in to plug the stock egr temp sensor connects into the wiring harness, both Spartan and H&S will see this probe as EGT temp using the OBD2.
-2nd side is ready to be taped to 1/8NPT if using an H&S EGT kit or similar product to read EGT
With the simple removal and replacement of the EGR feed pipe to the EGR coolers, these plates block EGR flow and allow pyrometer probe to go directly into the exhaust flow from the rightside manifold. This kit blocks the EGR without all the work involved in complete removal of EGR cooler and related electronics that the cooler delete kit does. Requires tuning to turn off EGR system prior to installation.
 

Latest posts

Members online

Top