1,000 Hp Excursion Build

weekendwarriorfsw32

New member
Joined
May 22, 2011
Messages
1,626
Reaction score
0
Location
Central California
This is what we did on a 68 VGT and 225's
5EF82D47-0639-4061-A220-D041F2A1FA82_zps1j7gcns8.png
 

Mdub707

Active member
Joined
May 18, 2011
Messages
5,079
Reaction score
0
Location
Mohawk NY
You did a dyno pull from 100mph-140mph? Why isn't there any RPM's on that graph? Kind of hard to tell what is going on there. Just HP and no TQ?

I've seen a couple 6.0's shift into overdrive on the dyno and run out to 140mph, they were screaming on the dyno. Gets a little scary being near that with mud tires on.

I hear you on the compounds and if you're trying to stay in that class I suppose it makes more sense. I've always been a little skeptical about the reliability of those 71mm VGT's, since they're mostly built off of a powermax frame, so they have a huge compressor wheel running on the same bearings and center section that was originally designed for a smaller 63mm or whatever the p-max is. I'm interested to see where this goes! Keep us updated.
 

Latest posts

Members online

Top