My personal compound build

Joined
Feb 21, 2012
Messages
481
Reaction score
0
Location
Cromwell, CT
2003 CCSB Black, 6" on 37's, im Tyler, i do work for sean at SDP now back when this started i was just a friend, but ok well i have been super busy to post up anything about this build, alot of people on here know about it from facebook/instagram and or personaly knowing me, well.... truck started out completely stock when u bought it back in high school junior year at 16yo, fresh out of high school it finally puked its HG's, i studded it my self cab off, went with my own full custom RR, with AD2, sump, warren 190/75's, a II hybrid vgt charger, water meth stage 3, rebuilt stock trans w/ 2000 stall RCD converter, deep trans pan, tons of auto meter gauges, edge cts, and ofcourse went up to my girl vivian's looney wild file, well truck ran great for about a year.... this is where i got bored and wanted more, it started out as well lets pull it apart swap to W HPO rails 04.5 style and bolt on a 62/75 compound set up on it and be done, well lets just say that didnt last to long nd its slowly gone up and up thanks to my buddy greg's, sean, jared and mark, thanks alot guys cuz its turning into a monster build with out 1 corner being cut at all, set up as of now will be s366 over a s488 both billet, with RCD 305cc hybrids, gunna still dual pump it with elite/warren/my own set up, these pics will go back some just under a year, over the next few days i will up date it till its where i am now 21 yo with this build....

-8BE1-4159-A25A-4852DF3EEDC7-1710-000000602E61D01C.jpg


-E42E-4639-97FE-047C2D1C0B46-1710-000000601CF9A536.jpg


my buddy let me use his shop to pull it apart wile i was working on getting my own place

-D8EE-4957-ADCD-39785B56C572-1710-0000005F4C7D3A1F.jpg


-E3F5-4E30-8D2C-3991449534DB-1710-0000005F3759CC8B.jpg


-7737-4FEE-ABF3-8951994D1FF8-1710-0000005F63272C7F.jpg


motor came out

-C877-4FDA-9C5C-F43AB2CD6A67-1710-0000005F183DEE4D.jpg


-367F-4295-B594-417995079E73-1710-00000061E28C8FDA.jpg


-1589-42E0-9A95-5586F610839F-1710-0000005FB86E50CE.jpg


after the motor and trans was out, cab was set back down, brakes and steering were reconected and truck was pushed out side

-B8C4-4518-B75B-45517EC614D3-1710-0000005EA3144B58.jpg


after bringing to block to the machine shop we found out it needed to be bored .20 and thats when we ordered a new never run block due to that we had more choice with pistons it being stock bore and also went to a 20mm block

-16A6-41E3-A334-B40E8A14671A-1710-0000005E659CABFC.jpg


got it all painted up,

-8B2E-42DB-B792-DFDD446E868B-1710-0000005E2735BC06.jpg


after talking to sean and jared, we started getting parts in, RCD R&R's rods

-D4A9-4B5E-BAA7-06075E9BB0EA-1710-0000005E44D048EB.jpg


also got a RCD Aluminum oil pan due to wanting to do a custom dual pump system and wanting to pull from the side of the pan, its a work of art

-5954-4623-B6A9-AC482952E3C8-1710-0000005E5AEBD08C.jpg


grabbed a Tial 50mm gate from SDP

-EBAC-4138-936B-FB82A544558B-1710-0000005E522D591C.jpg



Mahle stock bore, fly cut, deliped, coated pistons came in from jared at RCD

IMG_3564.jpg


also got in the first new stage 2 RCD billet cam

IMG_3504.jpg


IMG_3503.jpg


billet thick wall RCD wrist pins

IMG_3502.jpg


H11 studs from Elite

IMG_3501.jpg


sean owner of SDP (powerstroker67) and i started to assemble the short block,

IMG_3805.jpg


IMG_3807.jpg


IMG_3809.jpg


IMG_3818-1.jpg


IMG_3819.jpg


i missed a pic of the assembles all ready to go in but o well

IMG_4216.jpg


IMG_4217.jpg


IMG_4219-1.jpg


IMG_4218-1.jpg
 

imelmo

Active member
Joined
May 18, 2011
Messages
6,631
Reaction score
2
Nice! Not counting any labor (other than machining), how much do you think you have tied up in that short block?

.
 
Last edited:

Pizza pig

In the Brig (Banned)
Joined
Jun 4, 2011
Messages
3,715
Reaction score
0
Location
MD
Its come a long way Tyler, its only been what a year since its been down? LOL
 
Joined
Feb 21, 2012
Messages
481
Reaction score
0
Location
Cromwell, CT
well back in the spring time after i did some testing nd lets leave it at that, i had tyler out at RCD make me a set of 305/150 hybrids from 8 new ford injectors, i think i got the fuel side covered :postwhore2:

IMG_3760.jpg


also placed an order for a T4 style mount for the HP charger, and was quickly called by jared a few days later, when he told me him nd josh were working on something and will have something totally new for me tho i was going to have to wait i told him the parts i was looking for him knowing this was a custom compound truck i didnt need the down pipe or the hot side IC pipe parts of the kit...... well it showed up today and wow was it worth the wait!!

IMG_4636.jpg


IMG_4635.jpg


IMG_4634.jpg


IMG_4633.jpg


b843b93d-e193-4878-8358-99ac57e90136.jpg


Also was told that the stainless Log style exhaust manifolds would be ready around the same time, i said send a set my way and wow are they sweet deff worth it..... thanks boys are normal

IMG_4631.jpg
 

Latest posts

Members online

Top