OBS 7.3 engine and pickup build HP goal is in the 600HP range

Powerstroke Cowboy

Well-known member
Joined
May 20, 2011
Messages
4,355
Reaction score
153
Location
Montana
I am not shure if a got this in the right spot. So feel free to move it Mods..
Or you could tell me were to put it and I could move it..


Here is a list of what is going into the engine.. (yes it has changed a little)

ARP heastuds (in)
910 valve springs shimmed (in)
SB Push Rods (in)
Twin stealth HPOP (in)
140V IDM mod (in)
AirDog II fuel pump (in)
300/200 hybrid injectors (being built now)
T4 turbo mount kit (is in the pickup now for fabbing)
Chines GT4202 Turbo as the High pressure turbo (in right now for fabbing)
Borg warner S4TS508 as the low pressure turbo.. ( is being mounted now)
6.0L Intercooler (in)
99-03 Plenums (in)
dual filter air intake ( will be built after i get the S4T mounted)
Water injection to help with egts if need be (in)
Gauges, EGTs, HPOP, Fuel pressure, Transmission, and two boost gauges and a Exhaust back pressure gauge..
two 50mm Waste Gates on for the GT42 and one for the S4T ( I have them just need to mount them)
And tuning will be by Jody Tipton@DP-Tuner


If I am missing anything please let me know!!!

Like you all said a new thread a new start!!

Here are some pictures for yall to look at of the thing a have and of the things i have done.

GT42
GT42Turbo002.jpg

GT42Turbo005.jpg

GT42Turbo006.jpg

GT42Turbo003.jpg


Stealth twins and SD Plenums
HPOPpics009.jpg

PowerstrokeDUALHPOP005.jpg

new IPR
HPOPpics001.jpg


S4T turbo
S4TTurbo020.jpg

S4TTurbo018.jpg

S4TTurbo014.jpg

S4TTurbo009.jpg

S4TTurbo002.jpg

ARP Head studs
DLGPickupBuild091.jpg

Old injectors
DLGPickupBuild090.jpg



More to come
 
Last edited:

Powerstroke Cowboy

Well-known member
Joined
May 20, 2011
Messages
4,355
Reaction score
153
Location
Montana
Thanks!!

Yes it has stock forged rods and I am leaving the bottom end stock.. for now that is..


in the far futare
I would like to pick up a 7.3L block and build when i have the time and beaf it up. then switch all the parts from the engine i have now to the new engine, then get the injectors rebuilt to 400cc or maybe 465cc and go with 300% or 400%..

But that all depends on how good the setup i have now will work and how long it will last..
 

Powerstroked162

On Da Juice
Joined
May 18, 2011
Messages
10,069
Reaction score
0
Location
Wa. State
Oh jebus chrys.... Please, refrain from copying and pasting all that mess from PSN to over here. We all are very aware of your build. Thank you
 

Powerstroke Cowboy

Well-known member
Joined
May 20, 2011
Messages
4,355
Reaction score
153
Location
Montana
Oh jebus chrys.... Please, refrain from copying and pasting all that mess from PSN to over here. We all are very aware of your build. Thank you

LOL ssshhh dont mention the P------------S----------N word and mess up this good site that just got started...

Like others have said new site new start...
 

Powerstroke Cowboy

Well-known member
Joined
May 20, 2011
Messages
4,355
Reaction score
153
Location
Montana
Where some pics of your truck man?

I dont have any yet.. its kind of hard to get pictures in a dark barn.. AND i have about two feet on both sides to walk. about 5 in the back and 3 in the front..:doh:

I need more space!!

Besides i have the bed off right now and the rear axel tore apart.. I am doing lockers front and back and changeing the gearing out to 3.55s, and changeing all the seals and bearings in the front and back axel. and I am doing the brakes front and back to.. one of the back drums was in two pieces and both back brakes had no pad left on the brake shoe most of the metel on the brake shoes are gone to!!
 

Powerstroke Cowboy

Well-known member
Joined
May 20, 2011
Messages
4,355
Reaction score
153
Location
Montana
here is what i am up to..

pickupbuildturboinstalland355gears011.jpg

pickupbuildturboinstalland355gears010.jpg

this is about were the turbo will sit, just about one inch higher.
pickupbuildturboinstalland355gears008.jpg

I still need to finish the mount for the second turbo it is almost done though!!
pickupbuildturboinstalland355gears009.jpg

My brakes are shot
pickupbuildturboinstalland355gears007.jpg

pickupbuildturboinstalland355gears006.jpg


The LS differantial and ring gear..
pickupbuildturboinstalland355gears005.jpg

pickupbuildturboinstalland355gears004.jpg


The new locker instaled in the Ring gear housing.

pickupbuildturboinstalland355gears001.jpg

pickupbuildturboinstalland355gears002.jpg

pickupbuildturboinstalland355gears003.jpg


I will be doing the same thing to the front axle. new brakes and a locker.. new bearings and seals..


I will be doing more on monday.. since i have off work..
 

Latest posts

Members online

Top