I recently added some 2006 Lariat seats. I'm in the process of adding a 7.3 IC, E99 spider, and some modified 99 IC pipes. I rebuilt the turbo using a WW2, 1.0 exh housing, and had it all ceramic coated. Air compressor with bags are next.
Upgrades to the 97
- Thread starter Diabolic
- Start date
Swaan
New member
- Joined
- Mar 19, 2012
- Messages
- 734
- Reaction score
- 0
Looks very nice. I see you striped the factory coating on the alcoas. Looks great. Only thing id do is trim that exaust pipe back , someones gonna trip on that thing.
And add a nice tip.
And add a nice tip.
Swaan
New member
- Joined
- Mar 19, 2012
- Messages
- 734
- Reaction score
- 0
Yeah a nice 4 or 5 inch doubble walled mbrp are nice.
iowacornfarmer
New member
- Joined
- Jun 28, 2014
- Messages
- 98
- Reaction score
- 0
Hopefully you mounted those lariat seats to the original seat pan. I've seen tons of these trucks with different seats just bolted to the sheet metal on the floor.
Never had a seat pan. It had a bench in front. I used 2 of the original seat holes in front, drilled new holes for the rest. I used all new hardware and large 2.5" thick spacers doubled up. That's more than the bench has holding it down.
