7/8 -14 UNF fittings?

HobbyStock62

New member
Joined
Dec 20, 2012
Messages
483
Reaction score
0
Location
Mpls, MN
yes, another fuel system question...so i am getting baldwin filter bases (FB1311) and they have a 7/8 inlet and outlet...im not sure if i am overlooking something simple, or if they are hard to find, but what i THINK i need is a 7/8 -14 UNF fitting to go from the filter base to the -10 an hose end. is that right, or do i sound like a crack addict?
 

HobbyStock62

New member
Joined
Dec 20, 2012
Messages
483
Reaction score
0
Location
Mpls, MN
one more quick question about in between the filter and a1000. would i be able to link them directly, or will i have to use hose in between the filters and pump? if so, can i just use a strait -10 an to -10 an fitting in the a1000 then my -10 an hose ends?
 

ford rules

New member
Joined
Oct 15, 2012
Messages
1,392
Reaction score
1
You will need 2 -10 orb to -10 an male then 2 -10 orb to -10 female swivel.
 

ford rules

New member
Joined
Oct 15, 2012
Messages
1,392
Reaction score
1
Those should work also, didnt know where to buy those at. I may get some.
Your just going to have to see what will fit but i would say your gonna need a 90 and also have to find out what siZe thread is in the head, i wanna say its m12x1.5 but im not 100% sure on that.
 

09stroker

New member
Joined
May 22, 2011
Messages
1,300
Reaction score
1
Location
Texas
For the heads you need a 12mmX1.5 to -6 JIC or A/N adapter. Then use a -6 90 degree hose end.
 

ford rules

New member
Joined
Oct 15, 2012
Messages
1,392
Reaction score
1
Here's a few pics of a 90* threaded into the front driver side head.
null_zpsaa094947.jpg

null_zps9d7b44cf.jpg

null_zps0bce7f2e.jpg
 

Latest posts

Members online

Top