How to make 600 - 700 RWHP - 6.0L

imelmo

Active member
Joined
May 18, 2011
Messages
6,631
Reaction score
2
the ICP voltage should be reading correct however the icp actual pid will read very low. when testing for ICP it is a good idea to always log the voltage pid and not the actual.


What is pid? Hadn't heard that term before.

.
 

stonepusher

New member
Joined
May 21, 2011
Messages
514
Reaction score
0
Location
San Antonio
New power numbers........same setup as before new tune
592&1065 fuel
751&1277 one stage .125 jet
773&1340 two stages .074&.088

Track times to come tomorrow!
 

stonepusher

New member
Joined
May 21, 2011
Messages
514
Reaction score
0
Location
San Antonio
Did you get those track times?

Yes sir, sorry I forgot to post them here I posted them in another thread.
Fuel runs went awesome but was having some traction issues and early shifting issues with the nitrous. But here are my numbers:
Fuel 12.2@108 1.70 60ft
Juice 12.0@113 1.82 60ft
&
12.1@115 1.91 60ft

Don't have a bottle pressure gauge so not sure what my bottle pressure was at but I guess they sat it in cold water to fill it at the track bc when I picked it up it was really cold and wet, maybe this is normal practice idk never really paid any attention. The nitrous run was with one stage with the .125 jet. Just doesn't seem like this ole girl wants to hit the 11's, time for some more tweaking before Ennis.
 

andrewsteelerford05

New member
Joined
Jun 2, 2013
Messages
104
Reaction score
0
Location
Garrett county, Maryland
I Have a question about the setup that I am running I have a 2005 F 250 I'm running 205/100 injectors with a St366/74/91 non vgt turbo with a AirDog2 fuel pump Backed with a XDP sump innovative diesel 58V ficm built transmission built by Andy Warren zoodad mod bluespring mod 6.4 banjo bolts Jesse Warren tuning egr deleted head studded mpbr exhaust on 35s my ? what horsepower range Am I in? Next question on thinking about going with A different set up its 275/100 injectors with Jesse Warrens Dual HPOP and st472 turbo what horse power range would I be In with this setup?
 

05f250harley

New member
Joined
Jan 19, 2013
Messages
144
Reaction score
0
190s and compounds should put you there on fuel. with whats in your sig you will also need a fuel system and a trans.:fordoval:

What turbos would you guys suggest with 190? I don't know much about turbos. I know I want 600hp. Do you guys think towing would still be possible with a setup like this?


Sent from my iPhone using Tapatalk - now Free
 

Mwilbur516

New member
Joined
May 22, 2011
Messages
4,700
Reaction score
1
What turbos would you guys suggest with 190? I don't know much about turbos. I know I want 600hp. Do you guys think towing would still be possible with a setup like this?


Sent from my iPhone using Tapatalk - now Free

We 'be had several guys dyno at 600+ on fuel with 190/100's and our MTW Stage 3.
 

Derkperk

Member
Joined
Jun 1, 2013
Messages
717
Reaction score
0
Location
Twin cities
What turbos would you guys suggest with 190? I don't know much about turbos. I know I want 600hp. Do you guys think towing would still be possible with a setup like this?


Sent from my iPhone using Tapatalk - now Free

A barder or RCD 68 VGT, I think some guys are running a MTW stage 3. Sticking with a VGT for towing would be better.
 

03 tx pwr stroke

New member
Joined
Sep 27, 2011
Messages
1,027
Reaction score
0
Location
Texas
So what exactly would I need to hit 600 on fuel? I've been thinking about 225/100's and compounds. Looking for a complete parts list, ie rods, pistons, etc.
 

Latest posts

Members online

Top