American Force 22x11 Wheels

KingRanch6.7

New member
Joined
Jan 16, 2014
Messages
9
Reaction score
0
Cool man i appreciate it I've got the same truck except mine is tuxedo black and I like the burnout design
 

Swampfox

New member
Joined
Apr 26, 2013
Messages
294
Reaction score
0
Location
TN
I did no trimming. I did pull the fender liners back just to make sure there was zero rub.

4BB37E51-C1FA-4451-A530-8FE6E3CB31FE_zps2nnc1yv4.png
 

Taslim_6.7

New member
Joined
Sep 2, 2015
Messages
1
Reaction score
0
Hey can anyone give me advice ? T have a 2015 F350 long bed. I don't want to go to lift crazy, and I was wondering if anyone knows how a 22x11 with a 0 offset would look. Running a nitro terra grappler. This is what they recomend to me since I don't wan to go crazy with the lift .
 

TyCorr

New member
Joined
Jun 23, 2011
Messages
15,461
Reaction score
0
i had no idea that the 11 wides were so inset, wonder why the hell they did that

Not from AF mouth but the 22x11 is an oddball size that was intended for guys running stockish sized rubber but a hair wider without the wheel hanging out the fender.

Crap wheels, but xd was the only 11 wide that was decently offset. Not a reco for xd just pointing out the goofy offset 22x11 was a shot in the dark and the aftermarket clung to it for some reason.

I would stick to the universal offsets as jared mentioned. Whether you want a 17 or a 24. Stick to 10s and 12 wides with sensical negative offsets. On a 11+ obviously a 10 wide is best.
 

Swampfox

New member
Joined
Apr 26, 2013
Messages
294
Reaction score
0
Location
TN
For some reason the pic is gone again above. I liked my 22x11's with 35" Toyo M/T's. Had a 2.5" carli leveling kit with OUO ALA's and rear 4" blocks.

93A01312-4254-4EFC-88E7-85D5EF55DABC_zpsveeb8bxz.jpg
 

DarcyB

Member
Joined
Mar 5, 2016
Messages
83
Reaction score
0
Location
Airdrie, Alberta, Canada
So what I get from this is you can fit the 22x11 with 35x12.5 or 325/50 on a 2.5" level with no rubbing without trimming....or go with 22x10 with same tires on a 4" lift minimum without rubbing and trimming. And that's just because of wheel offset.

Sent from my SGH-I337M using Tapatalk
 

04cr450

Active member
Joined
Aug 25, 2013
Messages
1,788
Reaction score
0
Location
harford county, maryland
You will still have to do a touch or trimming.my advice would be get front bumper spacerS for kb fabworks... no rubbing what so ever - even with my 22x12 325/50's
 

DarcyB

Member
Joined
Mar 5, 2016
Messages
83
Reaction score
0
Location
Airdrie, Alberta, Canada
You will still have to do a touch or trimming.my advice would be get front bumper spacerS for kb fabworks... no rubbing what so ever - even with my 22x12 325/50's
That trimming is just on the bumper brackets then? Or the fender liner as well? ...I replaced my stock bumper with a herd bumper so I don't think the bracket spacers will be an issue/need.

Sent from my SGH-I337M using Tapatalk
 

SVTDiesel

New member
Joined
Jul 27, 2011
Messages
369
Reaction score
0
Location
Massachusetts
I run a 22x11 XD wheel with a 325/50/22 tire on a stock height 2016 F350 with zero rubbing. That's no lift, no leveling kit. And the tires stick out about an inch.
 

Latest posts

Members online

Top