Wheels and track bar torque specs

TTBOOST

Member
Joined
Feb 20, 2017
Messages
81
Reaction score
0
Location
Moline,il
I just installed a set of fuel wheels in my truck and the lugs are the acorn style instead of the flat stock lugs. Would I still torque them the the stock specs? Also I was wondering how much to torque the track bar and radius arm bolts at the frame. The instructions on the ready lift kit and what I’ve read else where is conflicting. Thanks in advance
 

sootie

Well-known member
Joined
Oct 3, 2012
Messages
11,854
Reaction score
29
If you have tapered lugs, make sure the rims have a matching taper to accept them or you have the wrong nuts. Track bar bolt on the frame side is 405 lb ft

Sent from my SM-G955W using Tapatalk
 

Hoosierdaddy

Member
Joined
May 9, 2014
Messages
41
Reaction score
0
The torque on the lugs will stay the same, I believe 140 for your truck. You’re torquing to set the studs to a certain yield regardless of lug type. I believe the radius arms are 250. Like Sootie said, use appropriate lugs for the wheels and make sure you torque the trackbar to spec. The 405 is for the end on the driver side, not the knuckle.
 

Latest posts

Members online

Top