Build time! S400 style

617mach 1x

New member
Joined
Oct 27, 2013
Messages
84
Reaction score
0
pulls great, doing some changes as we speak, dropping an inch, moving the hitch notching the bumper see if that helps also going to do gears soon still debating on 4.10 or 4.30
 

617mach 1x

New member
Joined
Oct 27, 2013
Messages
84
Reaction score
0
4.30s it is


Who cut vavle relifs? And how much are we talking about $ wise, I have the pistons and have a plan for the cam but I'll need .045 vavle relifs for it
 

617mach 1x

New member
Joined
Oct 27, 2013
Messages
84
Reaction score
0
Morgan @ Midwest does valve reliefs

What's your plans for studs? Any O-ringing?

Extreme studs and o-rings, porting, stage 3 cams, s475, pushrods and valve spring, refreshen bottom end while I'm there

That's the plan if that what happen and don't change by next summer I'll be surprised

Drag racing this weekend so I'll see how it does, hoping for mid 12s at lease, stock trans is saying "I fkn hate you" everytime I step on it so that's also on the list for an upgrade
 

617mach 1x

New member
Joined
Oct 27, 2013
Messages
84
Reaction score
0
12.99@102 was my best, with a boost leak and exhaust leak and blown hg so its wasnt so bad

need help with the lockup switch anyone got this figured out? have the diagram but cant figure out exactly how to wire it in right
 

617mach 1x

New member
Joined
Oct 27, 2013
Messages
84
Reaction score
0
Ok well after this weekend she's going under the knife again,

Another turbo kit nothing like it has been done on a 6.0 before
built bottom end with a twist
Oringed heads
Stage 3 cam
Ported heads
Custom intake

Fully built/billet internals trans

Front locker/spool
4.10s (I'll have the power for them)
A/m Rear locker

Going to stay with the 275/100 and dual pump I ran this yea only going to have them flowed and have new white solinoids or wtv installed

Hoping to brake into 800hp
 

617mach 1x

New member
Joined
Oct 27, 2013
Messages
84
Reaction score
0
Thanks Matt

Here a Alittle teaser of what I've been working on
 

Attachments

  • image.jpg
    image.jpg
    794.9 KB · Views: 123
Last edited:

TBagAMouseTrap

New member
Joined
Jan 26, 2014
Messages
160
Reaction score
0
Location
Windber PA
Just curious on how well a single gate works for my own build. Wouldn't bank 2 have excessive pressure with this setup? Thanks in advance.
 

617mach 1x

New member
Joined
Oct 27, 2013
Messages
84
Reaction score
0
alittle more detail

thats just a baby mock-up turbo, s400 will be used for testing
 

Attachments

  • 10428714_10154911666410176_8340250272805244823_n.jpg
    10428714_10154911666410176_8340250272805244823_n.jpg
    92.3 KB · Views: 89
  • 10868042_10154911666195176_5112441147234530489_n.jpg
    10868042_10154911666195176_5112441147234530489_n.jpg
    92.1 KB · Views: 88
  • 10846239_10154911666550176_1853639662657986914_n.jpg
    10846239_10154911666550176_1853639662657986914_n.jpg
    101.4 KB · Views: 86
  • 1896773_10154911665155176_3063327964781070603_n.jpg
    1896773_10154911665155176_3063327964781070603_n.jpg
    98.1 KB · Views: 77
  • 10847933_10154911665855176_3731121289489687725_n.jpg
    10847933_10154911665855176_3731121289489687725_n.jpg
    73.4 KB · Views: 82
Last edited:

617mach 1x

New member
Joined
Oct 27, 2013
Messages
84
Reaction score
0
Thanks ford rules!

Might know where I'm going to that picture

Also my rcd 275/100 for sale 1450$ out right 1100 with your good set of injectors
 

Attachments

  • image.jpg
    image.jpg
    1.7 MB · Views: 65
Top