Show & Go/Going to Try this Out combo Build

Jonnydime

Active member
Joined
Jun 26, 2012
Messages
2,319
Reaction score
8
Cool deal, I’m in Muskegon. You ever make it up this way anymore? Crazy seeing pics of work being done outside we have over a foot of snow on the ground

I usually make it up that way a few times a year. It was 80 degrees here today.
 

Jonnydime

Active member
Joined
Jun 26, 2012
Messages
2,319
Reaction score
8
Getting close.
B95606D8-8A58-4B19-AF9E-7114DF0B744C_zpsoecmrkas.jpg
 

Jonnydime

Active member
Joined
Jun 26, 2012
Messages
2,319
Reaction score
8
Had it running today but still have some small things to finish up. It is definitely going to need a muffler.
 
Last edited:

Jonnydime

Active member
Joined
Jun 26, 2012
Messages
2,319
Reaction score
8
It's big and silver and round. And I bet it gets hot.

Sent from my SM-N950U using Tapatalk
Hopefully it doesn't get that hot. I'm going to try to reuse it as an intermediate pipe for the compounds when I build them.
 

Black AOD

Well-known member
Joined
Aug 6, 2014
Messages
3,466
Reaction score
75
Location
Ohio
Hopefully it doesn't get that hot. I'm going to try to reuse it as an intermediate pipe for the compounds when I build them.
What's your plan for an atmo when you do compounds?

Sent from my SM-N950U using Tapatalk
 

Jonnydime

Active member
Joined
Jun 26, 2012
Messages
2,319
Reaction score
8
What's your plan for an atmo when you do compounds?

Sent from my SM-N950U using Tapatalk

I haven’t planned that far ahead. I was thinking f3 pro charger but I haven’t made my mind up yet. I might use the 82 I already have as well.
 

Jonnydime

Active member
Joined
Jun 26, 2012
Messages
2,319
Reaction score
8
Thoughts on twin 6466's as low pressures? The big boy precisions are so expensive to the point that I could buy two 6466's for the price of one 88+mm single.
 

Jonnydime

Active member
Joined
Jun 26, 2012
Messages
2,319
Reaction score
8
Had to get creative with the low pressure system. I didn’t want the water separator as close to the ground as it was on the red truck so I relocated it to the bed.
21CF999B-9555-423F-AEC2-646FC976C906_zpse2c4ntac.jpg

5F1EEFFD-84EE-4C8E-9996-83C50ABF9A0D_zpsqwv8ob4f.jpg
 

Lipka101

New member
Joined
Feb 2, 2014
Messages
586
Reaction score
0
Location
Maryland
Interesting, there was no way to move it up like the other filter or is the Seperator that much bigger?


Sent from my iPhone using Tapatalk Pro
 

Jonnydime

Active member
Joined
Jun 26, 2012
Messages
2,319
Reaction score
8
After some consultation I am moving the water separator back to the suction side of the pump on the frame rail. Turns out Dahl doesn’t recommend pumping thru their unit.
 

Jonnydime

Active member
Joined
Jun 26, 2012
Messages
2,319
Reaction score
8
Setup number 3. Hangs about 2” below the bottom of the bedside which is about 4” higher than it was on the red truck.
246107F4-C891-4814-B74F-F3C8BED789A4_zpssuphoilm.jpg

A596E3CF-E4FD-447B-9034-3554CDE0BF3A_zps1l4ce8ey.jpg
 
Last edited:

Latest posts

Members online

Top