My Project

bigrpowr

<How I Fly
Administrator
Joined
May 22, 2011
Messages
15,240
Reaction score
1
just an update-

we were trying to fuel the truck hard enough to make 1300-1400 plus without smoke, and so far no go with the RCD 100% , so Dallas is letting me borrow his Exergy's that should run a good bit cleaner and see if we can get our goal. from the beginning , i wanted a clean 1300hp , so hopefully we get there , although i will say 1100 horse with no smoke and 1200* EGT is pretty damn cool too .
 

bigrpowr

<How I Fly
Administrator
Joined
May 22, 2011
Messages
15,240
Reaction score
1
cool video from the GDP Tuning dyno facility. zane and the boys took the truck over there to verify the #'s they've seen and they were pretty much spot on. peak power was 1089/1799 tq , almost zero smoke at about 3000 feet of altitude . up there it drives about like stock ( told to me ) and shreds tires at any speed up to 100 mph . next phase is to fuel it a bit harder and see how these turbo's like it. my guess is around 1250-1300 they are done . can't wait for the next burnout vid courtesy of me.

http://www.youtube.com/watch?v=Y8hAmVLEQt8
 

Black AOD

Well-known member
Joined
Aug 6, 2014
Messages
3,466
Reaction score
75
Location
Ohio
Yeah this truck is by far one of my favorite crew cab 6.7's out there right now hands down
 

HS-MotorsportsZane

New member
Joined
Aug 8, 2013
Messages
469
Reaction score
0
1250-1300hp? No way, were only at 90 lbs of boost and 1100 degree of egt. Wait until 1500 degrees and 125 lbs of boost........then were getting somewhere:)
 

Latest posts

Members online

Top