Exhaust

DieselJuice

Member
Joined
Aug 5, 2011
Messages
142
Reaction score
0
Location
Kansas
So, I was thinking about getting some exhaust for the old farm truck, considering I've had it cut off right behind the cab for a couple years, and it's always been kind of annoying; it was just never a big deal.

Found one on Summit for pretty dang cheap, w/ free shipping and $75 rebate. http://www.summitracing.com/parts/wlk-19430/all

BUT, I don't want a 45* tail pipe.... I would rather have a 90* tail pipe on an obs ford, just look alot better imo.

So I was wondering if anybody knew where I could a 90* 4" tail pipe? Just figured it'd be easier to just find one and order one rather than make one, which would probably cost more.


Thanks for your help fellas.
 
Joined
Jul 8, 2011
Messages
569
Reaction score
4
Location
Central CA Foothills
Same tailpipe that fits a 95-97 Powerstroke will fit. 3.5, 4 and 5 inch available.


Walker makes some IDI specific exhaust but I know for a fact it is a 45 exit, leading me to do what Dave suggested.
 

old man dave

New member
Joined
May 26, 2011
Messages
1,005
Reaction score
2
Location
Petaluma, CA
4" Walker 55102 from Summit Racing. The existing hangers have to be changed but the shape is right to get over the axle. Make your own hangers out of 3/8" steel rod like the factory hangers. Has 45* end bend and is aluminized. Also will need straight sections of aluminumized 4" belled one end exhaust pipe to make up to muffler and downpipe. NAPA carries 4" one end belled pipe sections. NAPA may also carry Walker exhaust parts.

I've used the Walker on PSD installs and its a good quality piece.

Walker 55102 tailpipe.
http://www.summitracing.com/parts/wlk-55102

45* exhaust bend, 4"OD and 4" ID. If you get the longer legs on the bends then the tailpipe bend will go throught the chrome tip and keep it from rusting.
http://www.summitracing.com/parts/wlk-42246/overview/
 
Last edited:

Latest posts

Members online

No members online now.
Top