20% TO 40% OFF ON FORD OEM PARTS

Taylor D · Apr 24, 2014

Did my stuff ship out today?

Sent from my SM-G900P using Tapatalk

sunrisefordparts · Apr 24, 2014

Taylor D said:
Did my stuff ship out today?

Sent from my SM-G900P using Tapatalk

springs are gonna take a few days from ford, but the rest i can send out tomorrow or all together. your call bud.

Taylor D · Apr 24, 2014

sunrisefordparts said:
springs are gonna take a few days from ford, but the rest i can send out tomorrow or all together. your call bud.

Okay if u can go ahead and send everything else tomorrow. Thanks

Sent from my SM-G900P using Tapatalk

sunrisefordparts · Apr 25, 2014

Taylor D said:
Okay if u can go ahead and send everything else tomorrow. Thanks

Sent from my SM-G900P using Tapatalk

copy that

sunrisefordparts · Apr 25, 2014

Taylor D said:
Okay if u can go ahead and send everything else tomorrow. Thanks

Sent from my SM-G900P using Tapatalk

ups tracking #s 1z5775x90391113240, 1z5775x90390637436

ToMang07 · Apr 25, 2014

I did not get return labels for the calipers

Sent while swerving into the wrong lane...

sunrisefordparts · Apr 25, 2014

ToMang07 said:
I did not get return labels for the calipers

Sent while swerving into the wrong lane...

shoot me your email or email me and ill get some out to you [email protected]

sootie · Apr 28, 2014

sunrisefordparts said:
front pads list $116.63 sell $83.98
front rotors list $124.97 each sell $89.98 each
rear pads list $83.30 sell $59.98
rotors list $133.30 each sell $95.98 each
shipping $15
q#317931

sunrisefordparts said:
im assuming since its an eddie baurer that it has heated seats, either way they are priced the same
driver pad list $127.78 sell $92.00
passenger list $127.78 sell $92.00
free shipping
q#313566

ordered-thanks.

sunrisefordparts · Apr 28, 2014

sootie said:
ordered-thanks.

thanks alot bud.

Taylor D · Apr 28, 2014

sunrisefordparts said:
ups tracking #s 1z5775x90391113240, 1z5775x90390637436

Thanks

Hey what does it take to convert my 08 f350 2 door xl to power windows and locks?

Already found tan power door panels with switches

Sent from my SM-G900P using Tapatalk

sunrisefordparts · Apr 28, 2014

Countryboy07 said:
2003 6.0 Powerstroke:

-Complete set of valve cover bolts for the drivers side valve cover
-Turbo oil feed line gasket
-Turbo oil drain line o-rings
-9T288 HPOP discharge line and or O-ring where it connects to the branch tubes

usps tracking #9114901159818696689818

sunrisefordparts · Apr 28, 2014

Taylor D said:
Thanks

Hey what does it take to convert my 08 f350 2 door xl to power windows and locks?

Already found tan power door panels with switches

Sent from my SM-G900P using Tapatalk

it would be a fun time of getting harness', regulators w/motors, door lock actuators, and switches, or you can just get needed pigtails and wire it yourself.

Taylor D · Apr 28, 2014

sunrisefordparts said:
it would be a fun time of getting harness', regulators w/motors, door lock actuators, and switches, or you can just get needed pigtails and wire it yourself.

What's the best/ easiest way to do it and when u say harness is this an additional harness or completely new truck harness remove old replace with new?

Sent from my SM-G900P using Tapatalk

Countryboy07 · Apr 29, 2014

sunrisefordparts said:
usps tracking #9114901159818696689818

Thank you!

zilla68 · Apr 29, 2014

Rear Hub Seals - #2C3Z-1177-AB (Qty 2)
- Axle Shaft O-Rings - #E5TZ-4A331-A (Qty 2: Thanks to Guzzle for this one)
- Oil Slinger (I Broke Mine) - #F81Z-4670-AA (Qty 1: One per side; May Vary with model year)
- Inner Bearing - # F81Z1244AB (Qty 2: Cone Only Does NOT Include Cup, and please double check this Ford Part Number); Also TIMKEN# NP114036 09719 USA YZ081Z
- Outer Bearing - # C7TZ-1240-A (Qty 2: Cone Only Does NOT Include Cup); Also TIMKEN# LM104949 778 08 YT
- Inner Bearing Race - #NP064306 (Qty 2) Sourced from NAPA
- Outer Bearing Race - #LM104911 (Qty 2) Sourced from NAPA

10 ford wheel studs also

this was a copy and paste, but do these part numbers match up to a 96 f350 rear end also?

sunrisefordparts · Apr 29, 2014

Taylor D said:
What's the best/ easiest way to do it and when u say harness is this an additional harness or completely new truck harness remove old replace with new?

Sent from my SM-G900P using Tapatalk

if the truck isnt equipped with power to the doors then going the factory route would be have to replace harness' all over. if you went pigtails and ran your own power source then it would work out better just some good work for ya, luckily is only 2 doors.
ups tracking for the springs 1Z5775X90399045309

Taylor D · Apr 29, 2014

sunrisefordparts said:
if the truck isnt equipped with power to the doors then going the factory route would be have to replace harness' all over. if you went pigtails and ran your own power source then it would work out better just some good work for ya, luckily is only 2 doors.
ups tracking for the springs 1Z5775X90399045309

Okay shoot me a price with everything to go the pigtails with my own power source way.

Sent from my SM-G900P using Tapatalk

sunrisefordparts · Apr 29, 2014

Taylor D said:
Okay shoot me a price with everything to go the pigtails with my own power source way.

Sent from my SM-G900P using Tapatalk

so you only have door panels? does it have the switch bezel?

ToMang07 · Apr 29, 2014

For shats and giggles...

For a 2004 F-150 4x4 CC Lariat w/ 5.4L/auto:

Wheel Speed Sensors (LF+RF)
Front Hub Assemblies (L&R)

For a 2002 F-350 4x4 CCSB 7.3L:

LF Wheel Speed Sensor
EBPS
EBPS Tube

Also, calipers (cores) should be shipped back today!

Taylor D · Apr 29, 2014

sunrisefordparts said:
so you only have door panels? does it have the switch bezel?

Can I install switch bezels in the xl panels I have now if so I'll go that route if not gonna buy a set of lariat panels from the junk yard with switches already in them

Sent from my SM-G900P using Tapatalk