Go Back   PowerStrokeArmy > Power Strokes > 7.3 Tech

Reply
 
Thread Tools Display Modes
  #1  
Old 04-29-2018, 07:21 PM
2000f350intheworks's Avatar
2000f350intheworks 2000f350intheworks is offline
Private
Member's Gallery
 
Join Date: Apr 2018
Location: Canandaigua ny
Posts: 20
Thumbs down Steering wheel yanks

I have a 2000 f350 ecsb i put 2 wheel spacers on becaus ei have 2015 rims and tires i put on but now when im going down the road and turn the wheel to the left or right it wants to yank the way i want to go i am beyond tumped i know on the drivers side i have a little play up and down but not side to side and passenger side is tight but could it be my upper balljoints or wheelbearings
  #2  
Old 04-29-2018, 11:29 PM
79jasper's Avatar
79jasper 79jasper is offline
Major
Member's Gallery
 
Join Date: Feb 2012
Location: skiatook, Oklahoma
Posts: 2,418
Default

Something is worn.
Does it have a stabilizer?

Sent from my SM-G892A using Tapatalk
__________________
2003 F250 KR SCSB FX4
Depleted, studded, airdog (which isn't currently hooked up), fass regulated return, airaide, 4 inch straight pipe with mbrp muffler(so on to go), glowchit pyro, fuel, boost, and trans temp. (Of course don't work lol) Hercules terra track A/T2 315/70/17.
2013 Honda pilot Touring
http://badges.fuelly.com/images/sig-us/778639.png
http://badges.fuelly.com/images/sig-us/776628.png
  #3  
Old 04-30-2018, 05:21 AM
2000f350intheworks's Avatar
2000f350intheworks 2000f350intheworks is offline
Private
Member's Gallery
 
Join Date: Apr 2018
Location: Canandaigua ny
Posts: 20
Default

No stabilizer Was going to put on on but i dont think you can if it didnt have one on it i may be wrong
  #4  
Old 04-30-2018, 07:46 AM
79jasper's Avatar
79jasper 79jasper is offline
Major
Member's Gallery
 
Join Date: Feb 2012
Location: skiatook, Oklahoma
Posts: 2,418
Default

Yeah, plenty companies offer stabilizers.
The spacers likely aren't helping either.

Sent from my SM-G892A using Tapatalk
__________________
2003 F250 KR SCSB FX4
Depleted, studded, airdog (which isn't currently hooked up), fass regulated return, airaide, 4 inch straight pipe with mbrp muffler(so on to go), glowchit pyro, fuel, boost, and trans temp. (Of course don't work lol) Hercules terra track A/T2 315/70/17.
2013 Honda pilot Touring
http://badges.fuelly.com/images/sig-us/778639.png
http://badges.fuelly.com/images/sig-us/776628.png
  #5  
Old 04-30-2018, 08:10 AM
2000f350intheworks's Avatar
2000f350intheworks 2000f350intheworks is offline
Private
Member's Gallery
 
Join Date: Apr 2018
Location: Canandaigua ny
Posts: 20
Default

Awsome im gonna have to look into one i wouldnt run spacers but the 2025 rims catch my calipers in the front idk why thats why i went with the spacers i was going to go a different route but for free couldnt pass them up lol
  #6  
Old 06-07-2018, 08:53 AM
2000f350intheworks's Avatar
2000f350intheworks 2000f350intheworks is offline
Private
Member's Gallery
 
Join Date: Apr 2018
Location: Canandaigua ny
Posts: 20
Default

Ok currently i found out the wheel bearing is bad also the bearings for the half shaft fell right out when i took wheel bearing assembly off but now my problem is that when. Igo to the parts store there asking if its 4wheel abs or 2 wheel abs and the only abs on the truck is the front so which would it be
  #7  
Old 06-07-2018, 01:43 PM
Arisley's Avatar
Arisley Arisley is offline
Mod Squad
Member's Gallery
 
Join Date: May 2011
Location: Arlington, Texas
Posts: 9,022
Default

If you have ABS on the front it is 4WABS. The tone ring for the rear is inside the differential. It is also where the speedometer signal comes from.
__________________
E99 ECLB Dually, 2010 bed, 2005 headlights, smoked clearance lights, 2001 cup holder.
365,XXX miles. Pure stock, sorta.
SDRCM #478
PSA Conspirator # 22
  #8  
Old 06-07-2018, 07:41 PM
2000f350intheworks's Avatar
2000f350intheworks 2000f350intheworks is offline
Private
Member's Gallery
 
Join Date: Apr 2018
Location: Canandaigua ny
Posts: 20
Default

Perfect thank you so much bought one got it on and now i need that clip that goes into the splines on the half shaft i broke it idk how lol
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 11:08 PM.

 

Powered by vBulletin®
Copyright ©2000 - 2018, vBulletin Solutions, Inc.

Designed by Military Ltd