UVCH question

freddie

Member
Joined
May 18, 2011
Messages
301
Reaction score
0
Location
Ohio
New vs old UVCH harnesses. Both Ford brand. I noticed the new harnesses don't have the brown connector seal - is this normal? They were new in package. All 4 UVCH harnesses are missing them so I assume that's normal
fe6dcfa923bf9c9d39f327a7e721f939.jpg
c89cea40ade13ef8353fc42bc32f009f.jpg
 
Joined
Aug 12, 2011
Messages
452
Reaction score
10
Location
Parker, TX
Yeah, the old ones with the plastic holding tabs used the seals. The later units with the "bail wire" clips don't use seals. You don't need them when using the newer UVCHs (and they won't work if you try to put them on the new units). Cheers!
 

freddie

Member
Joined
May 18, 2011
Messages
301
Reaction score
0
Location
Ohio
Yeah, the old ones with the plastic holding tabs used the seals. The later units with the "bail wire" clips don't use seals. You don't need them when using the newer UVCHs (and they won't work if you try to put them on the new units). Cheers!
Thanks!!
 
Top