Zf6 to 4r100 swap?

jamesc7.3

New member
Joined
Dec 17, 2015
Messages
66
Reaction score
0
Before anyone asks, its what the customer wants lol
Has anyone ever swapped from a manual to a 4r100 in a 7.3 truck? Can I just change the trans harness and PCM and be good to go? I have all of the other parts needed just curious about any wiring issues before I jump into this job, truck is a 450 if that makes any difference, thanks for any info

Sent from my SAMSUNG-SM-G900A using Tapatalk
 

jamesc7.3

New member
Joined
Dec 17, 2015
Messages
66
Reaction score
0
Don't think you got where I was going with that lol

Sent from my SAMSUNG-SM-G900A using Tapatalk
 

co04cobra

Active member
Joined
May 21, 2011
Messages
3,003
Reaction score
10
Location
WV
What year truck? No chance on just swapping the harness's on 02-03 trucks.

The PCS idea would be the best.

There are other wiring changes on the auto underhood harness 99-01 also, but more doable on those.
 

jamesc7.3

New member
Joined
Dec 17, 2015
Messages
66
Reaction score
0
Truck is a 2000, I have plenty of parts trucks if I need anything, just wanting to know if I can swap the trans harness and PCM or if the rest of the harness is dofferent

Sent from my SAMSUNG-SM-G900A using Tapatalk
 

co04cobra

Active member
Joined
May 21, 2011
Messages
3,003
Reaction score
10
Location
WV
underhood harness is different. 3 plugs iirc on the innerfender vs 4.

If you have the parts trucks you should be able to get it to work with out pulling the dash. The harness for the auto shifter is inside under the column pieces.
 

jamesc7.3

New member
Joined
Dec 17, 2015
Messages
66
Reaction score
0
So I will probably have to change all of the harness under the hood? That may end up being more than I really want to get into, I need to look it over good and see for sure it sounds like

Sent from my SAMSUNG-SM-G900A using Tapatalk
 

jamesc7.3

New member
Joined
Dec 17, 2015
Messages
66
Reaction score
0
Just checked them out, they have a different amount of plugs like you said, will I have to change everything inside the cab also?

Sent from my SAMSUNG-SM-G900A using Tapatalk
 

jamesc7.3

New member
Joined
Dec 17, 2015
Messages
66
Reaction score
0
becc5ac0d2e0ef4d25696c022ffdaede.jpg
5ac1f3ace0a6ad0a8456c138d60c3417.jpg


Sent from my SAMSUNG-SM-G900A using Tapatalk
 

jamesc7.3

New member
Joined
Dec 17, 2015
Messages
66
Reaction score
0
Well against my better judgment I went ahead with this project, its been a real headache so far but the mechanical part is done (transmission is installed) and some how I lucked out and found a driveshaft the correct length! Just down to pulling the dash and changing that wiring now and if all goes well it will be running soon

Sent from my SAMSUNG-SM-G900A using Tapatalk
 

jamesc7.3

New member
Joined
Dec 17, 2015
Messages
66
Reaction score
0
Truck is running and driving with no issues other that having to change the master cylinder so the cruise will work 👍

Sent from my SAMSUNG-SM-G900A using Tapatalk
 

jamesc7.3

New member
Joined
Dec 17, 2015
Messages
66
Reaction score
0
Truck has been gone to the customer for about a week now and haven't heard anything, no news is good news 👍

Sent from my SAMSUNG-SM-G900A using Tapatalk
 

Latest posts

Members online

No members online now.
Top