American Force 22x11 Wheels

Cool man i appreciate it I've got the same truck except mine is tuxedo black and I like the burnout design

I did no trimming. I did pull the fender liners back just to make sure there was zero rub.

That's a clean look man thanks again for the picture

Hey can anyone give me advice ? T have a 2015 F350 long bed. I don't want to go to lift crazy, and I was wondering if anyone knows how a 22x11 with a 0 offset would look. Running a nitro terra grappler. This is what they recomend to me since I don't wan to go crazy with the lift .

what lift set up is this?

Leveling kit in the front. OUO traction bar kit in the rear that added an additional .5".

Dzchey21 said:

i had no idea that the 11 wides were so inset, wonder why the hell they did that

Click to expand...

Not from AF mouth but the 22x11 is an oddball size that was intended for guys running stockish sized rubber but a hair wider without the wheel hanging out the fender.

Crap wheels, but xd was the only 11 wide that was decently offset. Not a reco for xd just pointing out the goofy offset 22x11 was a shot in the dark and the aftermarket clung to it for some reason.

I would stick to the universal offsets as jared mentioned. Whether you want a 17 or a 24. Stick to 10s and 12 wides with sensical negative offsets. On a 11+ obviously a 10 wide is best.

I run a 325/50/22, 22 x 10 rim on a stock height f350 2016 platinum.

SVTDiesel said:

I run a 325/50/22, 22 x 10 rim on a stock height f350 2016 platinum.

Click to expand...

Do you have any pics?

Sent from my SGH-I337M using Tapatalk

For some reason the pic is gone again above. I liked my 22x11's with 35" Toyo M/T's. Had a 2.5" carli leveling kit with OUO ALA's and rear 4" blocks.

So what I get from this is you can fit the 22x11 with 35x12.5 or 325/50 on a 2.5" level with no rubbing without trimming....or go with 22x10 with same tires on a 4" lift minimum without rubbing and trimming. And that's just because of wheel offset.

Sent from my SGH-I337M using Tapatalk

You will still have to do a touch or trimming.my advice would be get front bumper spacerS for kb fabworks... no rubbing what so ever - even with my 22x12 325/50's

Anybody try 285/55's?

tommy1005 said:

Anybody try 285/55's?

Click to expand...

i did. didnt rub at factory height.

sootie said:

i did. didnt rub at factory height.

Click to expand...

Is that with the 10" wide or 11" wheels?

Sent from my SGH-I337M using Tapatalk

04cr450 said:

You will still have to do a touch or trimming.my advice would be get front bumper spacerS for kb fabworks... no rubbing what so ever - even with my 22x12 325/50's

Click to expand...

That trimming is just on the bumper brackets then? Or the fender liner as well? ...I replaced my stock bumper with a herd bumper so I don't think the bracket spacers will be an issue/need.

Sent from my SGH-I337M using Tapatalk

I run a 22x11 XD wheel with a 325/50/22 tire on a stock height 2016 F350 with zero rubbing. That's no lift, no leveling kit. And the tires stick out about an inch.

SVTDiesel said:

I run a 22x11 XD wheel with a 325/50/22 tire on a stock height 2016 F350 with zero rubbing. That's no lift, no leveling kit. And the tires stick out about an inch.

Click to expand...

Do you have some pics?

Sent from my SGH-I337M using Tapatalk

DarcyB said:

Is that with the 10" wide or 11" wheels?

Sent from my SGH-I337M using Tapatalk

Click to expand...

10s but there is miles of clearance on a stock height truck

sootie said:

10s but there is miles of clearance on a stock height truck

Click to expand...

That's what I like to hear, no problems with rub even when suspension is flexing over lease roads?
Have any pictures of that setup still?

Sent from my SGH-I337M using Tapatalk