No heat now that its cold outside

Grey_Matter

New member
Joined
Jun 22, 2016
Messages
166
Reaction score
0
Location
SOMD
at least when this, the alternator, and a/c are done the truck should be pretty damn reliable
 

Tree Trimmer

New member
Joined
May 22, 2011
Messages
2,016
Reaction score
0
i'm going to throw out that there have been ppl here giving you suggestions, and your shooting them down, or not doing them because you have to do some extra work to get at them, or you don't "think" it would be the problem.

and you'll notice, if you read back through the thread, that your help started disappearing when you started doing that. and i don't say that to be a a$$ or anything, i just point that out to make a observation. you came asking questions for help, you were given help and chose not to accept it for a variety of your own reasons, none of which made sense to the ppl offering help as all the suggestions were all diagnostic in nature to help either determine your issue or narrow it down.

carry on, and hope you get heat soon. its cold outside.
 

DEEZUZ

NO PUKESTERS
Joined
Jun 30, 2011
Messages
6,821
Reaction score
179
Location
NWI
I can understand to a point.

Big in big diesel world you gotta pay to play...
 

Jomax

Active member
Joined
May 18, 2011
Messages
8,576
Reaction score
7
Location
Arizona
dunno, havent had the motivation to pull everything off the front end to get to the waterpump, and i dont have a wrench large enough to remove the fan.



im literally out of money at this point.

i dont think it is, cause i dont have any coolant in my oil


You can rent the wrench at your local Autozone for free.


Sent from my iPhone using Tapatalk
 

Grey_Matter

New member
Joined
Jun 22, 2016
Messages
166
Reaction score
0
Location
SOMD
not my local autozone, they literally are worthless.

im just gonna buy the correct size wrench, makes life easier in the long run....but like i said im broke right now
 

dsberman94

Well-known member
Joined
Oct 9, 2013
Messages
11,545
Reaction score
56
Location
Pennsylvania
Try a different part store then. I know for a fact you can rent the right one for free since you'll probably only use it once.
 

Grey_Matter

New member
Joined
Jun 22, 2016
Messages
166
Reaction score
0
Location
SOMD
I live pretty far from any stores, let alone part stores .I'm okay with buying it.

You wouldn't happen to know for sure if it is in fact a 42mm like the 6.0 would you?
 

Grey_Matter

New member
Joined
Jun 22, 2016
Messages
166
Reaction score
0
Location
SOMD
Ordered the fan clutch tool today, as soon as it gets here I'm pulling the pump just to make sure it actually works
 

Grey_Matter

New member
Joined
Jun 22, 2016
Messages
166
Reaction score
0
Location
SOMD
Tool got here today, so hopefully this weekend I'll be able to pull the pump and inspect it
 

Grey_Matter

New member
Joined
Jun 22, 2016
Messages
166
Reaction score
0
Location
SOMD
Pump is good, I am officially out of ideas.
There is some cavitation as well, I don't want to change the front cover, but I think I probably need to
 

Grey_Matter

New member
Joined
Jun 22, 2016
Messages
166
Reaction score
0
Location
SOMD
20170128_142343_zps0h6hudlg.png
 

DEEZUZ

NO PUKESTERS
Joined
Jun 30, 2011
Messages
6,821
Reaction score
179
Location
NWI
It's definitely not the updated version, but I don't think you can combat the cavitation
 

DEEZUZ

NO PUKESTERS
Joined
Jun 30, 2011
Messages
6,821
Reaction score
179
Location
NWI
I'd like to see what temp the engine is reading. Is the fan clutch locked on?
 

Grey_Matter

New member
Joined
Jun 22, 2016
Messages
166
Reaction score
0
Location
SOMD
i dont have any other temp gauge other than the factory dash gauge. as for the fan clutch it spins freely
 

Latest posts

Members online

Top