6.0L Upgraded Turbos. Billet 63.5mm, 64.7mm, and 68mm

04stroker said:

Should be running mid next week. Waiting on my heads from the machine shop.

Click to expand...

Rykan........We're waiting.....lol.

This thread is gonna cost me money. But it wasn't hard earned so I guess I will spend it when it comes in.

I guess my bone stock turbo will get some use when I arrange the turbo deal. Lol. This should be interesting.

I can mod that pmax to a stage 3!

Oh I know and it's gonna happen. Just need time to get set up. 1600?

06_Whitebull said:

Rykan........We're waiting.....lol.

Click to expand...

He skipped off to Florida. LOL

LOL yes on vacation at theoment had a few part hold ups and things did not go as planned so it will get finished when I get back. Sorry for the delay guys.

I know all too well about delays.....Enjoy the time off....

Hey James, are these 71's made from a powermax?

Yep!

Any updates on that 71?

NRHX2009 said:

Stock Powermax turbo with 175/75 injectors did 515/820. Changed out compressor wheel only to the billet 11 blade and made 576/882

61hp increase and 62 ft/lbs

That is the 63.5mm compressor wheel or the stage 1.5 turbo.

Click to expand...

What was his setup to make those numbers with 175/75s and a Powermax? I've got 170/50s and a Powermax and I'm only at 460hp.

I honestly forget, I believe it was Kevin AKA Rescue 250 if I am not mistaken.

that 25% larger nozzle helps, and it all depends on dyno, temp, humidity, and other supporting mods

Any updates on the stage 4 yet ?

:whs:

No.... Nothing other than Rykan's word, says its insane. I would be up for another tester if someone is interested. 205/100's or larger. PM me for a price if interested in testing, maybe some dyno runs as well.

I've got 205/100s now with all the supporting mods.

Could dyno run at TSD with the stage 3 and then again after with the bigger turbo.

stage 4

I have 285/150 hybrids! Send me a stage 4!

ive rode around in rykans truck with the stage 4, its an animal! the turbo is wicked for sure.. lights very quick

I have a stage 3.....send me a trans!!! loloke:

Jeremy

lol, I sent another Stage 4 71mm out to a customer. Waiting for some feedback.

I am looking for someone that puts a fair amount of miles on their truck and has a set of 225/100's or larger. I wont put the turbo out there for sale until I get one with roughly 5-10K on it and get it back here to look at internals. If all looks well, I'll put them up for sale.