Video heavy: 6.0 Non VGT spool thread

Didn't get much over half throttle in these vids....

Wish I was able to get a setup like yours lance looks like a blast to drive!

here is a video of one of my set ups I was trying out. 66/73/91 billet with 195/100 injectors. This is with crappy wore out nozzles too.

http://www.youtube.com/watch?v=Xd6W_w_ghm0&feature=youtu.be

How did you like that turbo/injector setup Matt? Did you run it with upgraded nozzles?

I think it would be better with better injectors. The ones im running are not the ideal way to build them but its the parts I had laying around. The nozzles are 100s but they are old and wore out. atomization is probably less than ideal.

tune needs some work. but I think it is a streetable race set up.

http://www.youtube.com/watch?v=l2jcTh7dWxI&feature=youtu.be

same set up as before only thing changed is tuning and put stock nozzles on only because I cracked one. First is from dead stop to the floor, second is taking off at 55mph, third is is aggressive take off.

Here's a half throttle roll with the hybrids. those are 20 psi increments and it makes about 15 psi almost instantly when in get into throttle...

http://www.youtube.com/watch?v=S0-qQrU3ZGE

little brake boost in the driveway. 2000ish rpm = almost 20 psi.

http://www.youtube.com/watch?v=iuEx-fnrh2c

jealous...

poop

http://www.youtube.com/watch?v=PQFjJONj9Xk&feature=youtu.be

anal

http://www.youtube.com/watch?v=bkfCNzfPBbc
http://www.youtube.com/watch?v=HvSp0Ronkgk

S472. Spools pretty quick. Extremely streetable. Will have vids soon

subed for vids to see how your compares to mine

g2shuck said:

subed for vids to see how your compares to mine

Click to expand...

I'll try and get some vids when the truck is fixed. Whose injectors do you have and what size?

i had hypermax 225/100 conventionals but tommrorw I will be installing my 350/100 conventionals and my twin pump kit

who's building 350/150 conventionals? interested to see how that works for you. We are hoping to maybe go bigger with my injectors soon as well

Jesse built them and thy were flow tested today and are true 350s

Interested to see how it runs. You're running a 72/83/.90 as well correct?

Sure am till next month

yeah we will see how long this 72 stays on my truck. I think with my tuning issues figured out, and get it fueling as hard as it should be I think I could go bigger yet

dzlpwr said:

yeah we will see how long this 72 stays on my truck. I think with my tuning issues figured out, and get it fueling as hard as it should be I think I could go bigger yet

Click to expand...

How much different is the spool up compared to the 66?